1. Manuals
  2. Brands
  3. Stow Manuals
  4. Mixer
  5. MS-70
  6. Operation and parts manual

Stow MS-70 Operation And Parts Manual

Plaster and mortar mixer (gasoline engine/electric motor)
Hide thumbs Also See for MS-70:
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION AND PARTS MANUAL
MODEL MS-70
PLASTER AND MORTAR MIXER
(GASOLINE ENGINE/ELECTRIC MOTOR)
Revision #3 (03/26/10)
THIS MANUAL MUST ACCOMPANY
THE EQUIPMENT AT ALL TIMES.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS-70 and is the answer not in the manual?

Questions and answers

Related Manuals for Stow MS-70

Summary of Contents for Stow MS-70

  • Page 1 OPERATION AND PARTS MANUAL MODEL MS-70 PLASTER AND MORTAR MIXER (GASOLINE ENGINE/ELECTRIC MOTOR) Revision #3 (03/26/10) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
  • Page 2 ALWAYS work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. PAGE 2 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 3 © COPYRIGHT 2004, STOW CONSTRUCTION EQUIPMENT STOW Construction Equipment and the STOW logo are registered trademarks of STOW and may not be used, reproduced, or altered without written permission. All other trademarks are the property of thier respective owners and used with permission.

  • Page 4: Table Of Contents

    Drum and Paddle Shaft Complete Assembly ... 48-49 Axle Assembly ............50-51 Engine Assembly ............ 52-53 Electric Motor Assembly ......... 54-55 Cabinet Assembly ........... 56-57 Specifications and are subject to change without NOTE notice PAGE 4 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 5: Here's How To Get Help

    Toll-free nationwide — 800-427-1244 POST OFFICE BOX 6254 CARSON, CA 90749 888-252-STOW [888-252-7869] 310-537-3700 Toll-free FAX — 800-6-PARTS-7 (800/672-7877) FAX: 310-537-1986 FAX: 800-556-1986 E-MAIL: stow@multiquip.com INTERNET: www.stowmfg.com STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 5...

  • Page 6: Specifications

    ) . g ) . g In accordance with our established NOTE policy of constant improvement, we reserve the right to amend these specifications at any time without notice. PAGE 6 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 7: Dimensions

    STOW MS-70 PLASTER/MORTAR MIXER — DIMENSIONS i r c i t p . n i . n i ) r a . n i . n i Figure 1. Dimensions STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 7...

  • Page 8: Safety Messages Alert Symbols

    CAUTI CAUTI You CAN be INJURED if you DO NOT follow WARNING WARNING WARNING WARNING WARNING Respiratory Hazards these directions. ALWAYS wear approved respiratory protection when required. PAGE 8 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 9 ON/OFF switch in the OFF position. CAUTION CAUTION CAUTION CAUTION CAUTION Eye and Hearing Hazards ALWAYS wear approved eye and hearing protection. STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 9...

  • Page 10: Rules For Safe Operation

    ■ NEVER use accessories or attachments, which are not when the drum is in the discharge (down) position. recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result. PAGE 10 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 11 ■ Refer to the HONDA Engine Owner's Manual for engine technical questions or information recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result. STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 11...

  • Page 12: Towing Guidelines

    5 when securing the tow bar to the towing vehicle and to the up position (mouth facing upwards) and lock the drum the unit being towed. latch. PAGE 12 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 13: Safety Chain Connection

    (Figure 3) of the drum stop block. This will keep the drum from rotating. Figure 3. Drum Latch Pin (Tow or Locked Position) Figure 2. Tow Bar and Safety Chain Installation STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 13...
  • Page 14 Machine Safety Decals The STOW MS-70 mortar and plaster mixer is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. Figure 4 below illustrates these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer.

  • Page 15: General Information

    . Choose an extension cord of adequate current carrying capacity as ref- erenced in Table 6. Remember cable distance affects the current-voltage capacity of the extension cable. STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 15...

  • Page 16: Basic Mixer Components

    19. Chock Blocks — Place these blocks (not included as part of the mixer package) under each mixer wheel to prevent rolling. PAGE 16 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 17: Basic Engine Components

    10. Fuel Tank – Holds unleaded gasoline. For additional smoothly. information refer to engine owner's manual. STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 17...

  • Page 18: Electric Motor

    Special attention should be given to the electric switch as well as the over-and-under voltage protection devices as per regulations set forth in the local electrical safety code handbook PAGE 18 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 19 Important!, when changing the input voltage to the motor from 115 to 230 VAC, the plug on the motor power cord must also be changed. See Table 5. STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 19...

  • Page 20: Paddle Blade Adjustment

    STOW MS-70 — PADDLE BLADE ADJUSTMENT (STEEL DRUM) Adjust paddles as shown in Figure 8. Figure 8. Paddle Blade Adjustment, Steel Drum PAGE 20 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 21: Inspection

    C ° 2. Remove the filler dipstick from the engine oil filler hole (Figure 9) and wipe it clean. Figure 9. Engine Oil Dipstick (Removal) STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 21...
  • Page 22 Check the zerk grease fittings at each end of the mixing disconnected or improperly maintained. drum. These grease fittings lubricate the dumping mechanism. If the dumping handle is stiff or hard to move lubricate these fittings. PAGE 22 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 23: Start-Up Procedures

    If your mixer has an electric motor Figure 13. Throttle Lever disregard this section. Move the fuel shut-off lever (Figure 11) to the ON position. Figure 11. Fuel Shut-OFF Lever STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 23...
  • Page 24 Pull the starter grip (Figure 19) lightly until you feel resistance, then pull briskly. Return the starter grip gently. Figure 16. Belt Slip Lever (Start/Stop Position) Figure 19. Starter Grip PAGE 24 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 25 Disconnect the electric motor's extension cord from its power source. Clean mixer as referenced in the maintance section of this manual. Figure 21. Drum Lock Pin (Left Position) STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 25...
  • Page 26 ) 3 ( a i c i t a r e t t n i r e t . s l PAGE 26 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 27: Maintenance (Engine)

    Table 7. For engine oil capacity, see Table 2 (engine specifications). DO NOT overfill. 4. Install drain bolt with sealing washer and tighten se- curely. Figure 25. Engine Air Cleaner Figure 24. Engine Oil (Draining) STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 27...

  • Page 28: Maintenance (Mixer)

    Figure 29. Wheel Hub and Bearings Figure 27. Grease Fittings (Dumping Mechanism) PAGE 28 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 29 IMPORTANT! avoid over- NOTE greasing. Excess grease will accumulate contaminates and cause premature wear. Figure 30. Drive Pinion and Main Gear (Backlash) Figure 32. Pinion and Bull Gear Lubrication STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 29...
  • Page 30 (break- off) with great force and can cause serious eye or bodily injury. PAGE 30 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 31 " 3 " 4 " 5 " 6 NEVER! use an pneumatic air gun NOTE to tighten wheel lug nuts. Figure 34. Wheel Lug Nuts Tightening Sequence STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 31...
  • Page 32  Place the mixing drum in the down position (mouth facing downward).  Cover the mixer and place it a clean dry area, that is protected from harsh elements. Figure 36. No Spraying of Water PAGE 32 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 33: Troubleshooting (Engine)

    . r e u f l o i t t e r . r o r o t o l f . t a STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 33...
  • Page 34 . l a r o t s u j s u j t e r . r o e " c i r PAGE 34 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 35: Troubleshooting (Mixer/Electric Motor)

    . e t e v i r o t c t i c t i e v i r o t r i a STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 35...

  • Page 36: Electric Motor Wiring Diagram

    STOW MS-70 MIXER — WIRING DIAGRAM (ELECTRIC MOTOR) Figure 24. Electric Motor Wiring Diagram PAGE 36 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 37 NOTE PAGE STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 37...

  • Page 38: Explanation Of Code In Remarks Column

    >, belong to the same assembly or kit. If more than one of the same reference number is listed, the NOTE last one listed indicates newest (or latest) part available. PAGE 38 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 39: Suggested Spare Parts

    3 ..9807956855 ..SPARK PLUG, W20EPR-U, DENSO 1 ..28462ZE2W11 ..ROPE, RECOIL STARTER 1 ..17620ZH7023 ..CAP, FUEL TANK 2 ..EM203010 ... KIT, WIPER BLADES (STEEL DRUM) STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 39...

  • Page 40: Nameplate And Decals

    STOW MS-70 MIXER — NAMEPLATE AND DECALS NAMEPLATE AND DECALS PAGE 40 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 41 DECAL, CRUSH WARNING SAFETY GRATE DCL280 DECAL, WARNING DUMP HANDLE 513522 DECAL, DRUM LOCK 13118 DECAL, POWDER COATED NAMEPLATE ............1 ..CONTACT PARTS DEPT. SEE OPERATION AND SAFETY DECALS PAGE. STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 41...
  • Page 42 STOW MS-70 MIXER — FRAME ASSY. FRAME ASSY. PAGE 42 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 43 BALL HITCH 2-INCH ........... 1 ....CONTACT UNIT SALES HLC-1 LOOP HITCH .............. 1 ....CONTACT UNIT SALES HPC-1 PIN HITCH 1-INCH ............1 ....CONTACT UNIT SALES STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 43...
  • Page 44 STOW MS-70 MIXER — PADDLE SHAFT ASSY. PADDLE SHAFT ASSY. PAGE 44 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 45 WASHER, LOCK 5/15" EM202899 PADDLE ARM, TOW END EM202927 BLADE ,SCRAPPER END EM202926 BLADE, RUBBER END EM203010 KIT, WIPERS, SCRAPPERS & HDWARE ....1 ....INCLUDES ITEMS W/ STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 45...
  • Page 46 STOW MS-70 MIXER — STEEL DRUM ASSY. STEEL DRUM ASSY. PART OF REAR FRAME PART OF FRONT FRAME NOTES: SET SCREWS AND BEARING COLLAR ARE INCLUDED WITH BEARING AND CANNOT BE PURCHASED SEPARATELY. PAGE 46 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 47 6109180 WASHER, LOCK 1/2" EM963692 BOLT 1/2" UNC 1-1/2" EM963102 CAPSCREW, HHCS 1/2" NC X 1-1/4" 492584 NUT, LOCK1/2" NC EM201537Y HANDLE DUMP 15081 GRIP, DUMP HANDLE STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 47...
  • Page 48 STOW MS-70 MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY. DRUM AND PADDLE SHAFT COMPLETE ASSY. PAGE 48 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 49 EM202899 BLADE, SIDE, SCRAPPER 2105164 NUT, HEX 5/16" NC G5 EM923343 WASHER, LOCK 5/15" EM202899 PADDLE ARM, TOW END EM202927 BLADE ,SCRAPPER END EM202926 BLADE, RUBBER END STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 49...
  • Page 50 STOW MS-70 MIXER — AXLE ASSY. AXLE ASSY. PAGE 50 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 51 WASHER, FLAT, .135" THICKNESS EM903113 BEARING CONE EM903012 BEARING CUP 10 # EM914288 OIL SEAL EM941306 HUB ASSY., 4-BOLT ............2 ... INCLUDES ITEMS W/ # 514802 AXLE, UNIVERSAL STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 51...
  • Page 52 STOW MS-70 MIXER — ENGINE ASSY. ENGINE ASSY. PAGE 52 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 53 WASHER, LOCK 5/16" 492624 WASHER, LOCK 3/8" 492553 NUT, HEX 5/16" 492554 NUT, HEX 3/8" EM102014 SPRING, EXTENSION 90745ZE2600 SQ. KEY 6.3 X 6.3 X 43 MM STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 53...
  • Page 54 STOW MS-70 MIXER — ELECTRIC MOTOR ASSY. ELECTRIC MOTOR ASSY. PAGE 54 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 55 NUT, HEX 5/16" NC 492623 WASHER, LOCK 5/16" EM923023 WASHER, FLAT 5/16" 492378 BOLT 3/8" NC X 1-3/4" G5 530024 SPRING, EXTENSION 500169 KEY, 3/16" X 50 MM STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 55...
  • Page 56 STOW MS-70 MIXER — CABINET ASSY. CABINET ASSY. PAGE 56 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 57 WASHER, FLAT 3/8" 492583 NUT 3/8" NC G5 29174-001 KNOB, MUSHROOM 29173-001 SWITCH, PUSH-PULL 504135C WIRE HARNESS RAL1003S PAINT, SPRAY CAN 12 OZ., YELLOW RAL1003G PAINT, GALLON CAN, YELLOW STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 57...

  • Page 58: Honda Gx240K1Ha2 Engine

    HONDA GX240K1HA2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 58 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 59 ELBOW COMP., AIR CLEANER ....1 ..... INCLUDES ITEM W/ # 0037806000 WINGNUT 6MM 90325044000 WINGNUT, TOOL BOX SETTING 90009ZE2003 BOLT- WASHER 6 X 22 9405006000 NUT, FLANGE 6MM STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 59...
  • Page 60 HONDA GX240K1HA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 60 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 61 SPRING, VALVE 14771ZE2000 RETAINER, IN. VALVE SPRING 14773ZE2000 RETAINER, EX. VALVE SPRING 14781ZE2000 ROTATOR, VALVE 14791ZE2010 PLATE, PUSH ROD GUIDE 90012ZE0010 BOLT, PIVOT 8MM 90206ZE1000 NUT, PIVOT ADJ. STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 61...
  • Page 62 HONDA GX240K1HA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 62 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 63 JET, MAIN #82, OPTIONAL 99101ZH70850 JET, MAIN #85, OPTIONAL 99101ZH80880 JET, MAIN #88 99204ZE20400 JET SET, PILOT #40 16015ZE8005 CHAMBER SET, FLOAT ....1 ..INCLUDES ITEMS W/ STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 63...
  • Page 64 HONDA GX240K1HA2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 64 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)

  • Page 65: Control Assembly

    SPRING, CONTROL ADJUSTING 90013883000 BOLT, FLANGE (6 X 12) (CT200) 90015ZE5010 BOLT, GOVERNOR ARM 90114SA0000 NUT, SELF- LOCK (6MM) 93500050280A SCREW, PAN (5 X 28) 9405006000 NUT, FLANGE STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 65...
  • Page 66 HONDA GX240K1HA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 66 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 67 WASHER, PLAIN (6MM) 957010803500 BOLT, FLANGE (8 X 35) 961006202000 BEARING, RADIAL BALL (6202) 961006204000 BEARING, RADIAL BALL (6204) 961006206000 BEARING, RADIAL BALL (6206) 961006302000 BEARING, RADIAL BALL (6302) STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 67...
  • Page 68 HONDA GX240K1HA2ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 68 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 69 HONDA GX240K1HA2ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PART NO. PART NAME QTY. REMARKS 13320ZE2611 CRANKSHAFT (L- TYPE) ......1 ..INCLUDES ITEM W/ 13351ZE2010 WEIGHT BALANCER 961006206000 BEARING, RADIAL BALL (6206) STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 69...
  • Page 70 HONDA GX240K1HA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 70 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 71 031112230 WASHER, DRAIN PLUG 12MM 9425110000 PIN, LOCK 10MM 957010601200 BOLT, FLANGE 6X12 961006202000 BEARING, RADIAL BALL 6202 90013883000 BOLT, FLANGE 6X12 CT200 34150ZH7003 ALERT UNIT, OIL STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 71...
  • Page 72 HONDA GX240K1HA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 72 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 73 WASHER COMP., HEAD COVER 9430112200 PIN A, DOWEL 12X20 950051100130M BULK HOSE, VACUUM 11X1000, 11X100 957011008000 BOLT, FLANGE 10X80 9807956846 SPARK PLUG, BPR6ES, NGK 9807956855 SPARK PLUG, W20EPR-U, DENSO STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 73...
  • Page 74 HONDA GX240K1HA2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 74 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 75 16731ZE2003 CLIP, TUBE 19610ZE2010ZC COVER COMP., FAN *NH1* BLACK 19631ZE2D00 SHROUD 32197ZH8003 SUB-HARNESS 36100ZE1015 SWITCH ASSY., ENGINE STOP 90013883000 BOLT, FLANGE 6X12, CT200 90684ZA0601 CLIP, WIRE HARNESS STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 75...
  • Page 76 HONDA GX240K1HA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 76 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 77 PART NO. PART NAME QTY. REMARKS 19511ZE2000 FAN, COOLING 28450ZE2W11 PULLEY COMP., STARTER, SCREEN GRID 31100ZE2010 FLYWHEEL COMP. 90201ZE3V00 NUT, SPECIAL 16MM 90741ZE2000 KEY, SPECIAL WOODRUFF 25X18 STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 77...
  • Page 78 HONDA GX240K1HA2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 78 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 79 BOLT, FLANGE (6 X 12) (CT200) 90050ZE1000 SCREW, TAPPING (5 X 8) 90055ZE1000 SCREW, TAPPING (4 X 6) 90050ZE1000 SCREW, TAPPING (5 X 8) (OPTIONAL) 9405008000 NUT, FLANGE (8MM) STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 79...
  • Page 80 HONDA GX240K1HA2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 80 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 81 GASKET, FUEL FILLER CAP 17672ZE2W01 FILTER, FUEL 91353671003 O-RING 14MM, ARAI 9405008000 NUT, FLANGE 8MM 950014500360M BULK HOSE, FUEL 4.5X3000, 4.5X222 9500202080 CLIP, TUBE, B8 957010802500 BOLT, FLANGE 8X25 STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 81...
  • Page 82 HONDA GX240K1HA2 ENGINE — IGNITION ASSY. IGNITION COIL ASSY. PAGE 82 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 83 PART NO. PART NAME QTY. REMARKS 30500ZF6W02 COIL ASSY., IGNITION 30700ZE1013 CAP ASSY., NOISE SUPPRESSOR 31512ZE2000 GROMMET, WIRE 36101ZE1010 WIRE, STOP SWITCH 370MM 90015883000 BOLT, FLANGE 6X28 STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 83...
  • Page 84 HONDA GX240K1HA2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 84 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 85 13200ZE2000 ROD ASSY., CONNECTING STANDARD ....1 ..INCLUDES ITEMS W/ 13200ZE2305 ROD ASSY., CONNECTING, US 0.25, OPT. 90001ZE8000 BOLT, CONNECTING ROD 90551ZE1000 CLIP, PISTON PIN 18MM STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 85...
  • Page 86 HONDA GX240K1HA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 86 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 87 28441ZE2W01 SPRING, FRICTION 28442ZE2W01 SPRING, STARTER RETURN 28443ZE2W01 SPRING RATCHET 28444ZE2W01 RETAINER, SPRING 28461ZE2W02 GRIP, STARTER 28462ZE2W11 ROPE, RECOIL STARTER 90004ZE2W01 SCREW, CENTER 90008ZE2003 BOLT, FLANGE 6X10 STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 87...
  • Page 88 HONDA GX240K1HA2 ENGINE — GEAR REDUCTION ASSY. GEAR REDUCTION ASSY. PAGE 88 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 89 PIN A, DOWEL ( 8 X 14) 957010802500 BOLT, FLANGE (8 X 25) 957010804000 BOLT, FLANGE (8 X 40) 961006206000 BEARING, RADIAL BALL (6206) 961006302000 BEARING, RADIAL BALL (6302) STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 89...
  • Page 90 HONDA GX240K1HA2 ENGINE — LABEL ASSY. LABEL ASSY. PAGE 90 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 91 PART NO. PART NAME QTY. REMARKS 87521ZE2W01 EMBLEM, INTERNAL 87522ZE1810 MARK, CAUTION, EXTERNAL 87522ZH9000 LABEL, CAUTION 87528ZE2810 MARK, CHOKE, EXTERNAL 87586ZH7W00 LABEL, FUEL CAUTION 87532ZH8810 MARK, OIL ALERT STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 91...

  • Page 92: Terms And Conditions Of Sale - Parts

    Atlanta • Boise • Newark • Quebec, Canada www.stowmfg.com Manchester, UK • Rio de Janeiro, BR • Puebla, MX PAGE 92 — STOW G-4.5R A.C. GENERATOR— OPERATION & PARTS MANUAL — REV. #0 (12/15/03) PAGE 92 — STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10)
  • Page 93 NOTE PAGE STOW MS-70 MIXER — OPERATION MANUAL — REV. #3 (03/26/10) — PAGE 93...
  • Page 94 © COPYRIGHT 2009, MULTIQUIP INC. Multiquip Inc, and the STOW logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission.

Table of Contents