Abocom 5-Port Fast Ethernet SW500B Specification

5-Port Fast Ethernet
N-Way Switch
The 5-Port Fast Ethernet N-Way Switch provides you a flexible, reliable,
and affordable solution of the Ethernet network.
independent 10/100Mbps ports. Each port delivers up to 200Mbps throughput,
and is able to operate in either half or full-duplex modes.
The 5-Port Fast Ethernet N-Way Switch also features N-Way (auto-negotiable), which automatically adjusts the device for
optimal operation; "Store-and-Forward" architecture filters to eliminate error packets and improve efficiency. Plus, based on
MDI/MDIX auto crossover technology, just use either a straight through or a crossover Ethernet cable, and you can get connected
with any other devices.
Features
* Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standards
* "Store and Forward" architecture filters
* IEEE 802.3x or Back Pressure (HDX) Flow Control
* 2K MAC Address table supported
* Five 10/100Mbps Auto-Detection ports
* 10/100Mbps auto-detection on Full or Half Duplex
* Power Feeding: +5Vdc/1.5A
* Each Ethernet port supports MDI/MDIX (auto crossover) capacity.
Specification
Standards
Protocol
Ports
Switching Scheme
Flow control
Cabling type
Speed per port
MAC Address
LED indicators
Physical Dimension
Weight
Input power specifications
Power Consumption
Agency and Regulatory
Operating Temperature
Operating Humidity
It comes with five
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control
CSMA/CD
Five 10/100Mbps RJ-45 Ports (support Auto-MDI/MDIX)
Store-and-Forward
Full Duplex: IEEE802.3x
Half Duplex: Back Pressure
UTP Category 3 or better (10Base-T)
UTP Category 5 or better (100Base-TX)
10Mbps or 100Mbps (Half Duplex)
20Mbps or 200Mbps (Full Duplex)
2K
Power Green
LINK/ACT Green: on for successful connection, flashing for activity
SPD Green: on for 100Mbps, off for 10Mbps
3
82 x 66 x 20 mm (Width x Depth x Height)
180g
DC 5V, 1.5V
2.2W
FCC/CE/C-tick ClassB
0°C to 40°C
5~90% non-condensing