Page 1
Model: AP-32H ADC+DAC Headphone Amplifier Dear Friends, Thank you for purchasing BRIK AP-32H, you can find content as below in the box. BRIK AP-32H x 1 unit USB Cable x 1pc BRIK 12V Adaptor x 1pc BRIK Disc x 1pc(included driver.) BRIK User Manual.
Page 2
// INDEX// Page Subject 02----------------------------------Technical Specification of BRIK AP-32H 02----------------------------------Front Panel Environment 03--------------------------------- Rear Panel Environment 03~06-----------------------------Install driver of AP-32H 07----------------------------------Uninstallation Guided Instruction 07~09-----------------------------Suggested software to execute Playback with AP-32H 09---------------------------------- Suggested software to execute Recording with AP-32H...
Page 3
16, 24 bit & 32bit 2 Channel Front Panel Environment □ Volume Control for 2 headphone output. □ On/Off Switch on front, power LED will glow when power on. □ 3.5mm headphone jack x 2 on front panel of AP-32H.
Page 4
Install driver of AP-32H 1. Please execute driver of AP-32H on the BRIK CD-ROM. 2. Installing process Power on AP-32H and connect it to the PC, driver will start automatic installation as following: AP-32H Driver Installation based on a Windows-based PC Open the driver folder and select “SETUP.EXE”, installation START.
Page 5
Click “NEXT STEP” to proceed, as PIC.2 (PIC.2) Check in the column. Click “Next” to move on installation, as PIC.3. (PIC.3)
Page 6
Message window states installation status and please click on “Next” for next step. (PIC.4) (PIC.4) Please reboot PC and finish installation, PIC.5 (PIC.5)
Page 7
After reboot, you can find icon of BRIK AP-32H(PIC.6) on Device Manager of the PC, the installation is finished. (PIC.6) PLEASE NOTE: The Wizard Installation appearance may be slightly different depends on XP/Vista and Windows 7 system environment. **Uninstallation Guided Instruction:...
Page 8
-- Please key in “.rar” or.”zip” behind when you’re saving component. -- Please copy all files and paste it to FooBar2000 main folder in your hard disk. (PIC.7 as WASAPI for example, you can use ASIO Output support as well) -- And, restart FooBar and go for Preference Playback Output Window and...
Page 9
(PIC.9 As WASAPI for example, choose one of them (WASAPI PUSH or Event,BRIK AP-32H) or choose ASIO:ASIO4ALL v2, below PIC.10) (PIC.10)
Page 10
Suggested software to execute Recording with AP-32H. --Suggested Recording Software “Magix Samplitude Pro” --Please execute Magix Samplitude Pro as PIC.11 (PIC.11) -- Click “File” ->”Record” and there will be a window shown up as PIC.12...
Page 11
-- You can press monitor(green circled) and listen recording situation by AP-32H(phone jack), besides, you can also check recording volume by “Visualizer”(green circled) -- Here is example of BRIK test 384KHz Flac music file for reference and have a great time with BRIK AP-32H!