Toyota 2003 ECHO Owner's Manual page 14

SU12058
2. Remove the discharged transmitter bat-
tery.
NOTICE
Do not bend the terminals.
14
SU12059
3. Put a new transmitter battery with posi-
tive (+) side up.
Close the transmitter case securely.
NOTICE
_ Make sure the positive side and
negative side of the transmitter bat-
tery should be faced correctly.
_ Do not replace the battery with wet
hands. Water may cause unexpected
rust.
_ Do not touch or move any compo-
nents inside of the transmitter, or
it may interfere with proper opera-
tion.
_ Be careful not to bend the electrode
of the transmitter battery insertion
and that dust or oils do not adhere
to the transmitter case.
_ Close the transmitter case securely.
After replacing battery, check that the
transmitter operates properly. if the trans-
mitter still does not operate properly, con-
tact your Toyota dealer.
If you lose your transmitter, contact your
Toyota dealer as soon as possible to
avoid the possibility of theft, or an acci-
dent. (See "If you lose your wireless re-
mote control transmitter" in Section 4.)
For vehicles sold in U.S.A.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including
that may cause undesired operation.
2003 ECHO from Aug. '02 Prod. (OM52481U)
interference