Label - Sony Ericsson C905 Working Instructions

3.61 Label

Follow the 2.2 Disassembly instructions!
• Read the old label and/or write the information into
the "Label make" program before removal
Note the position of the label before removal
Heat up the label by using hot air, if needed
Carefully remove the label without causing
scratches
If there still are residues, clean the surface with
isopropyl alcohol
•
N OTE : I F YOU ARE PRINTING A B RAZIL OR VIVO
LABEL , REFER TO SECTION 5 FOR MORE
INFORMATION ON THE COUNTRY OF
ORIGIN .
Check that the proper label format is loaded in the
Zebra printer
Write a new label by using the program "Label
make" and check that the printing is OK
Take the new label and place it onto the frame as
in the adjacent picture
N OTE : D O NOT GET ANY LABEL ADHESIVE ON THE
BATTERY
CONTACTS .
O
NE LABEL ONLY IS ALLOWED
Follow the 4.14 Reassembly instructions
1218-1731 Rev 3
©
Company Internal Sony Ericsson Mobile Communications AB
!
Working Instruction, Mechanical
67(87)