SiPix Pocket Printer A6 User Manual page 8

Pocket Printer A6
Selecting and configuring a COM port
1. Go to START
2. Right-click on the Pocket Printer A6, and select PROPERTIES.
3. Click on the DETAILS tab.
4. Select the COM port that the Pocket Printer A6 is connected to. (Most
commonly COM 1 or COM 2 for cable connections, and COM 4 for infrared
serial connections.)
5. Click on the PORT SETTINGS button.
6. Set the port to the following configuration:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1 or 2
Flow Control: Hardware
7. Click OK on the COM port Properties window.
8. Click OK on the Pocket Printer A6 Properties window.
Installing the Driver Software for the Pocket Printer A6 on a PDA
Installing the Pocket Printer A6 driver on Palm OS
1. Insert the driver CD into your CD-ROM drive.
2. Double click on MY COMPUTER
3. This will bring up your Palm Desktop Install Tool.
4. Choose the correct User and click DONE.
5. Place your PDA in the HotSync cradle (or attach the HotSync cable) and
HotSync your PDA.
SiPix Technical Support
SETTINGS PRINTERS.
CD-ROM DRIVE
www.sipix.com/support
User's Guide
IrPrintA6.prc.
8