Congratulations; Consumer Safety; Important Safety Information - FOX RACING SHOX 32mm Forx Owner's Manual

4

CONGRATULATIONS!

Thank you for choosing FOX 32MM FORX for your bicycle. In doing so, you have chosen the finest suspension fork in the world. FOX Racing Shox products
are designed, tested and manufactured by the finest professionals in the industry in Santa Cruz County, California, USA.
As a consumer and supporter of FOX Racing Shox products, you need to be aware of the importance of setting up your fork correctly to ensure maximum
performance. This manual provides step-by-step instructions of how to setup and maintain your fork. It is a good idea to keep your receipts with this
manual, and refer to it for service and warranty issues.
For detailed service instructions, consult a FOX Service Manual for your particular product. This manual does not contain step-by-step detailed service
instructions for a reason: FOX recommends that detailed service be performed by an Authorized Service Center or FOX Racing Shox.

CONSUMER SAFETY

> Keep your bicycle and suspension system in optimal working condition.
> Wear protective clothing, eye protection and helmet every time you ride.
> Know and ride within your limits.
> Follow IMBA's Rules of the Trail. For more information, go to www.imba.com:
1. Ride on open trails only
4. Always yield trail

IMPORTANT SAFETY INFORMATION

> Verify that the brakes are installed and adjusted properly before riding the bicycle. Improperly installed or adjusted brakes can cause loss of control
and serious or fatal injuries. Use only V-type or disc brakes designed by the manufacturer for use on FOX 32MM FORX. Do not use brace-mounted cable
leverage devices. Do not route brake cables or housing through the stem.
> If your fork loses oil, tops out excessively or makes unusual noises, immediately stop riding and contact FOX Racing Shox or an Authorized FOX Racing
Shox Service Center for inspection. Continued use of the fork can cause loss of control and serious or fatal injuries. Some noises such as spring rattle,
oil flow and minor clicks are normal.
> Use only FOX Racing Shox replacement parts. Using aftermarket parts on FOX 32MM FORX will void the warranty. Aftermarket replacement parts can
also cause structural failure resulting in loss of control and serious or fatal injuries.
> If mounting the bicycle in a carrier designed to hold a fork by its dropouts, use caution to not tilt the bicycle to either side. Tilting the bike with the
dropouts in the carrier can cause structural damage to the fork. Ensure that the fork is fastened securely with the quick-release and that the rear wheel
is properly held. If the bicycle ever tilts or falls from a bicycle carrier, do not ride it until it is examined by a qualified dealer, Authorized Service Center
or FOX Racing Shox. A fork leg or dropout failure can cause loss of control and serious or fatal injuries.
> FOX 32MM FORX do not include reflectors for on-road use. FOX 32MM FORX are designed to be used in competitive off-road riding and racing. Proper
reflectors meeting the Consumer Product Safety Commission's (CPSC) requirements should be installed if the fork will be used on public roads.
> FOX 32MM FORX have a crown/steerer/upper tube assembly. These parts are pressed together in a one-time, precision press-fit operation. Replacement
of any of these parts requires a complete new assembly. Do not attempt to remove or replace the steerer or upper tubes independently of the crown.
DO NOT ATTEMPT TO ADD THREADS TO THREADLESS STEERERS. Modifying the crown/steerer/upper tube assembly as described here can cause the rider
to lose control of the bicycle resulting in serious or fatal injuries.
2006 FOX FORX OWNER'S MANUAL | P/N: 605-00-044
2. Leave no trace
5. Never scare animals
3. Control your bicycle
6. Plan ahead