Advertisement
Quick setup
procedures
Polaview 1700/1900
Quick reference guide
Thank you for purchasing Polaroid's liquid-crystal-display
(LCD) projection panel. This quick-setup information is
common to both the Polaview Model 1700 and Model 1900
Projection Panels, except where indicated.
1 Turn off your computer system and overhead projector.
Place your panel on the overhead projector.
2 Connect the video Y-cable as shown below for either
VGA or Macintosh II systems. VGA systems use cable part
number C454-6, Macintosh II systems use cable part num-
ber C464-6.
MON (monitor)
CPU
(computer/VGA)
3 Power: With your panel POWER switch in the Off position,
connect the AC adapter to the panel power connector, then
plug the power cord into the adapter. Finally, plug the
power cord into a grounded AC wall outlet.
4 Turn on your panel first, then the computer, monitor, and
finally the overhead projector.
LCD
Advertisement
Table of Contents
Summary of Contents for Polaroid Polaview 1700
- Page 1 Polaview 1700/1900 Quick reference guide Thank you for purchasing Polaroid’s liquid-crystal-display (LCD) projection panel. This quick-setup information is common to both the Polaview Model 1700 and Model 1900 Projection Panels, except where indicated. Quick setup 1 Turn off your computer system and overhead projector.
-
Page 2: Control Panel
Quick reference guide Cable part number C400-6 connects the video-source For video connections (Model 1900 only) Video Out jack to the Video In jack of your panel. Cable part number C466-6 (not included) connects an S-VHS or S-Video source to the S-VHS input port of your panel. For audio connections Connect the audio-source Audio Out jack to the Audio In jack of your panel. - Page 3 Quick reference guide 1 POWER ON Main power switch. 2 Arrow keys Use these keys to select and adjust the Status Window settings or to make small adjustments to the image position. 3 TINT Adjusts color-balance: R adds red; G adds green* 4 TEXT For VGA video mode, this key toggles...
- Page 4 Quick reference guide Gain access to these key functions by first pressing the SHIFTed keys SHIFT key. SHIFTed key functions are printed in green on the panel. – Intensity + Shift Clear Power Freeze R Tint G Text Vid Sel –...
-
Page 5: Remote Control
Quick reference guide Remote control The remote-control gives you access to all of the control-panel functions except for those of the POWER ON switch and the STORE and REAR PROJection keys. In addition to the control-panel key functions, the remote control has FWD, REV and PAUSE keys. - Page 6 1 Including VESA 640 x 480 at 72 Hz 2 640 x 480 resolution, 256 color mode only 3 May require external third party adapter; call Polaroid for more information 4 Optional accessory For technical support, please contact your dealer or call Polaroid Corporation at 1-800- 432-5355.
Need help?
Do you have a question about the Polaview 1700 and is the answer not in the manual?
Questions and answers