Panasonic Viera TH-L32X20K Operating Instructions Manual page 27

Channel List Edit
Select a channel and reveal / hide
Channel List Editor
8
9
10
11
12
13
14
Auto Tuning Set all TV channels automatically
Start Auto Tuning
Auto Tuning
All tuning data will be erased
EXIT
Start Auto Tuning
RETURN
●
All the previous tuning settings are erased.
●
When the operation is completed, the channel at channel position "1" will be displayed.
●
Search begins in the order from the lower channels to the higher channels. Channels received
during this process are added to the list (see above).
●
If tuning has not been done completely
Manual Tuning Set TV channel manually
Manual Tuning
8
Fine Tuning
Manual Tuning 1
Sound System 4.5MHz
Colour System
NTSC
Enter channel
Select
EXIT
Store
Search
RETURN
Select a channel position
TH-L32X20KMRTX_EN.indd 27 TH-L32X20KMRTX_EN.indd 27
Skip unwanted channels
●
To reveal all channels
●
To retune selected channel
(Manual Tuning)
Settings are made automatically
Auto Tuning
1
Scan
EXIT
RETURN
"Manual Tuning" (see below)
Fine Tuning
●
CH37
Use to make small adjustments to the tuning of an
individual channel (affected by weather conditions, etc.)
120
Manual Tuning
Set channel manually after Auto Tuning.
●
Set Sound System and Colour System, and then perform
CH Up
this function. Set Colour System "Auto" normally.
CH Down
●
If a VCR is connected only with the RF cable, select
channel position "0".
Select a channel
reveal / hide
You can hide unwanted
:reveal channels. The hidden
:hide (skip)
channels cannot be
select
displayed except in this
function.
Use this function to skip
unwanted channels.
Automatically retune all TV
CH2
channels received in the area.
1 120
Search and store
search
store
27
2/11/2010 5:14:46 PM 2/11/2010 5:14:46 PM