Table of Contents
Advertisement
INTERNAL AUDIO SYSTEM
4. Installation
There are just 10 simple steps to follow for a quick and easy installation
of your Internal Audio System:
Step 1
Switch off power to the PC in which you're installing the Internal Audio
System. Remove the CPU housing cover from your PC (follow instructions
1
provided with your computer) and locate the open 5
⁄
-inch disk bay.
4
Step 2
Slide the Internal Audio System unit into the 5
1
⁄
-inch disk bay in your PC. You
4
may have to apply slight, steady pressure to seat the unit completely in the
disk bay.
Step 3 (Skip to Step 5 if your PC does not have a sound board).
Find a vacant slot opening in the back panel of your PC and remove the
existing metal blanking panel (if any). Insert the Metal Bracket with the
attached colored stereo cables, provided with the Internal Audio System.
See Figure 4.1.
Figure 4.1. Interior View of PC Expansion Slot Compartment,
Showing Installation of the Metal Bracket.
8
Advertisement
Table of Contents
