Table of Contents
Advertisement
Quick Links
operator manual
FRESH-O-MATIC
®
Model 4000
This document includes:
• Specifications
• Operating Instructions
• Cooking Options
• Cleaning Instructions
• Troubleshooting
Revision: A
P/N: 20000096
ACCEPTED FOR
USE
CITY OF NEW YORK
DEPT. OF BUILDINGS
MEA 328-83 – E VOL ii
Lincoln Foodservice Products, LLC
1111 North Hadley Road
Fort Wayne, Indiana 46804
United States of America
Technical Support Hotline: (800) 678-9511
Telephone: (260) 459-8200
www.lincolnfp.com
Advertisement
Table of Contents
Summary of Contents for Lincoln Electric FRESH-O-MATIC 4000
- Page 1 P/N: 20000096 ACCEPTED FOR CITY OF NEW YORK DEPT. OF BUILDINGS MEA 328-83 – E VOL ii Lincoln Foodservice Products, LLC 1111 North Hadley Road Fort Wayne, Indiana 46804 United States of America Technical Support Hotline: (800) 678-9511 Telephone: (260) 459-8200...
-
Page 2: Warranty
Lincoln elects, free of charge, provided that in the event of any such defects the Fresh-O-Matic shall be returned within the warranty period to the nearest authorized service station, transportation prepaid. -
Page 3: Operation
COOKING OPTIONS MAIN DISHES Fresh-O-Matic serves hundreds of steaming-hot convenience foods, from beef to lobster dinners. And a Lincoln Fresh-O-Matic is more than a single-portion speed-merchant. It heats two to four servings just as fast – with the same tasty results. - Page 4 COOKING OPTIONS (CONT’D) BAKED GOODS – FRESH, ROOM TEMPERATURE (Longer time for refrigerated) HEATING TIME From Room Temperature *Open Hamburger and Weiner Buns 15 seconds *Coffee Cake 15 to 30 seconds *Pancakes 15 to 30 seconds Fruit and Nut Breads, sliced 20 to 45 seconds *Corn bread 30 to 45 seconds...
-
Page 5: Maintenance And Cleaning
MAINTENANCE & CLEANING PRESS POWER BUTTON OFF Lift out removable aluminum food tray. Clean thoroughly. Brush out crumbs in food tray compartment. AFTER FRESH-O-MATIC HAS BECOME COOL Remove cover. Clean thoroughly. Wipe food tray casting with damp cloth. If necessary, scour food tray casting with a nylon soap pad. Wipe casting clean. Open all steam vent holes with cleaning tool #4040. - Page 6 WATER FILTER REPLACEMENT INSTRUCTIONS NOTE: IT IS RECOMMENDED THAT THE WATER FILTER (PART #4042) BE REPLACED EVERY SIX (6) MONTHS TO ENSURE OPTIMAL PERFORMANCE OF YOUR FRESH-O-MATIC. Remove the Filter Fill Tube from the Water Filter by pressing in the Collet Ring. With the Collet Ring depressed, pull tube out from water filter.
- Page 7 This page intentionally left blank. 4000 Series Operator Manual...
- Page 8 4000 Series Operator Manual...
Need help?
Do you have a question about the FRESH-O-MATIC 4000 and is the answer not in the manual?
Questions and answers