Table of Contents
Advertisement
Cover
SD-SDI Input and LOCK Indicator at the Rear Panel
LED State Description
LED State
Description
Off
The SDI Input is not active.
Red
The SDI Input is active, but not locked.
Green
The SDI Input is active and is locked.
The SDI Input is active, but video of the wrong line standard is being
Alternate Red and Green
received.
Audio Input
Digital Support
Digital audio may be input via the 15-way D-type connector labelled AUDIO/DATA.
15-way D-type at the Rear Panel
See
Technical Specification
for further details.
Breakout Cables
The digital audio can either be balanced (AES3) or unbalanced (AES3-id) depending upon the audio breakout cable used:
Marketing Code
Part Number
VP/CAB/BAL
S14936 Audio Breakout Cable
VP/CAB/UNBAL
S14937 Audio Breakout Cable
An audio breakout cable is NOT supplied as standard with the chassis, but must be ordered separately.
NOTE :
The chassis detects which cable is fitted (balanced or unbalanced) and selects appropriately.
AES3
Interface
Balanced
Connector
XLR-3
Impedance
110 Ω
Input Level
2-7 V peak to peak
file://C:\Users\ebriacl\AppData\Local\Temp\~hh7DF.htm
The picture alongside shows the Video input connector: SD-SDI 75 Ω
female BNC socket at the module rear panel.
Also illustrated is the LED indication for SD SDI lock status.
The LED (marked LOCK at the module rear panel) is used to show the
status of the module and/or incoming video signal.
The 15-way D-type supports digital audio balanced and
unbalanced signals (but not at the same time).
Supported Audio Mode
Balanced Audio: 4 XLRs in + 1 BNC for ref tone
out
Unbalanced Audio: 4 BNCs in + 1 BNC out for
tone out
AES-3id
Unbalanced
BNC
75 Ω
1 V peak to peak
Page 43 of 153
ref
9/11/2012
Advertisement
Table of Contents
