Advertisement
Using the Media Player
To display / hide the operation guide during
[Single View] and [Slideshow]
Media Player allows you to enjoy photo, music or video
recorded on a USB Flash Memory.
[View]
The picture may not appear correctly on this TV
Enters Single view mode to view photo one at a time
depending on the digital cameras used.
Display may take some time when there are many files
[Slideshow]
and folders in the USB Flash Memory.
Partly degraded files might be displayed at a reduced
Lets you view all photos in the slideshow mode
resolution.
[View Select]
The folder and file names may be different depending on
the digital camera used.
Lets you toggle between thumbnail view and folder view.
1
Insert the USB Flash Memory
[Option Menu]
TV
Contains [Slideshow Settings] menus to set up slideshow.
[Transition Effect]
Insert or remove straightly
Effect for photo switching during slideshow
and completely.
[None] / [Dissolve] / [Wipe right] / [Wipe left] /
[Wipe up] / [Wipe down] / [Box out] / [Random]
[Screen Mode]
2
Start Media Player
Screen mode for Single view and Slideshow
MEDIA
[Normal] / [Zoom]
PLAYER
–
Depending on the photo size, it may not be fully
3
enlarged to ll the screen, e.g. portrait style picture.
Select the mode
[Interval]
Contents Select
Slideshow interval [5] / [10] / [15] / [30] / [60] / [90] /
EXIT
Select
[120] (seconds)
RETURN
Access
Photo
Music
Movie
[Repeat]
USB
Slideshow repeat [Off] / [On]
[Photo]: Displays the thumbnail of all photos in the
[Back Ground Music]
USB device.
Background music during photo viewing
[Music]: Displays the thumbnail of music folders in the
[Off] / [Type 1] / [Type 2] / [Type 3]
USB device.
Note
[Movie]: Displays the thumbnail of video titles in the
Picture quality may suffer depending on the slideshow
USB device.
settings.
Picture setting may not work depending on the slideshow
[Contents Select]
settings.
Switching between modes
When you are in the thumbnail view of any mode, you
Music mode
change to the other mode by returning to the [Contents
Media Player
Music
Select] screen.
B
My Music_1
My Music_2 My Music_3
Photo mode
Media Player
Photo
All photos
Access
EXIT
Info
Select
RETURN
Option Menu
Play Folder
Drive Select
Operation guide
Follow the operation guide to perform available
operations in Music mode.
View
EXIT
Info
USB
Select
RETURN
Option Menu
To display / hide the operation guide during
Slideshow
View Select
Drive Select
Contents Select
playback
Operation guide
To playback all music in the selected folder
: Error display
R
Follow the operation guide to perform available
operations in Photo mode.
8
TH-32A400_408_409_410KGMX_EN.indd 8
Additional Information
Supported file format in Media Player
Photo
Auto power standby function
JPEG (.jpg, .jpeg)
–
Supported image resolution: 8 × 8 to 30,719 × 17,279
The TV will automatically go into Standby mode in the
–
DCF and EXIF standards
following conditions:
–
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
No signal is received and no operation is performed for
–
Progressive JPEG is not supported.
30 minutes in Analogue TV mode.
Music
[Off Timer] is active in the Setup Menu.
No operation is performed for the period selected in [Auto
MP3 (.mp3) / AAC (.m4a) / WMA (.wma)
Standby] (p. 11).
FLAC (.flac) / WAV (.wav)
Video
Aspect
AVI (.avi) / MKV (.mkv) / ASF (.asf, .wmv) /
[16:9]
MP4 (.mp4, .m4v) / FLV (.flv) / 3GPP (.3gp, .3g2) /
TS (.ts) / PS (.vob, .vro) / RMVB
Directly displays the image at 16:9
without distortion (anamorphic).
Copy-protected files cannot be played back.
WMA Pro and WMA Lossless are not supported.
[14:9]
RMVB files are only supported by A408K, A409K, A400K
Displays the image at the standard 14:9
and A410K/M series.
without distortion.
Note
[Just]
Even if these conditions are fulfilled, some files may not
Displays a 4:3 image full-screen.
be played back depending on how they are encoded.
Stretching is only noticeable at the left
Do not use two-byte characters or other special codes
and right edges.
for data.
[4:3]
The device may become unusable with this TV if the file
Displays the image at the standard 4:3
or folder names are changed.
without distortion.
HDMI connection
[4:3 Full]
Displays a 4:3 image enlarged
This TV incorporates HDMI™ technology. HDMI (high-
definition multimedia interface) is the world's first complete
horizontally to fit the screen.
HD signal only
digital consumer AV interface complying with a non-
compression standard.
[Zoom1]
HDMI allows you to enjoy high-definition digital images
Displays a 16:9 letterbox or 4:3 image
and high-quality sound by connecting the TV and the
without distortion.
equipment.
[Zoom2]
Applicable HDMI features
Displays a 16:9 letterbox (anamorphic)
Input audio signal:
image full-screen without distortion.
2ch Linear PCM (sampling frequencies - 48 kHz,
[Zoom3]
44.1 kHz, 32 kHz)
Input video signal:
Displays a 2.35:1 letterbox (anamorphic)
"Input signal that can be displayed" (p. 12)
image full-screen without distortion.
Match the output setting of the digital equipment.
At 16:9, displays the image at its
maximum (with slight enlargement).
DVI connection
If the external equipment has only a DVI output, connect to
Input signal that can be displayed
the HDMI terminal via a DVI to HDMI adaptor cable.
When the DVI to HDMI adaptor cable is used, connect the
audio cable to the audio input terminal as follows:
Signal name
COMPONENT
HDMI
A410M/X only: use AV1 IN AUDIO terminals
525 (480) / 60i, 60p
Other models: use AV IN AUDIO terminals
625 (576) / 50i, 50p
Note
750 (720) / 60p, 50p
Audio settings can be made on [HDMI1 / 2 Input] in the
1,125 (1,080) / 60i, 50i
Sound Menu (p. 10).
These HDMI connectors are "type A".
1,125 (1,080) / 60p, 50p, 24p
These HDMI connectors are compatible with HDCP
Mark : Applicable input signal
(High-Bandwidth Digital Content Protection) copyright
Signals other than above may not be displayed properly.
protection.
The above signals are reformatted for optimal viewing on
Equipment having no digital output terminal may be
your display.
connected to the input terminal of component or video to
receive analogue signals.
12
To playback the selected file only
INFO
Using the Menu
Select the folder
Select the file
Play
Functions
R
OK
OK
1
Display the menu
[Option Menu]
MENU
Contains [Music Setup Menu] to set up play mode.
2
[Repeat]
Select the menu
[Off]: Playback repeat off
[One]: Playback repeat on the selected one file
[Folder]: Playback repeat within the selected folder
Picture
Sound
Movie mode
Setup
Media Player
Movie
Title view
3
Select the item you want, then change /
adjust or access
Trip1
Trip2
Trip3
Trip4
Trip5
Room
Nature1
Example:
Nature2
Nature3
Nature4
Nature5
Nature6
2010_4
2010_7
Picture Menu
Viewing Mode
Backlight
2010_9
Access
Info
USB
Contrast
EXIT
Select
RETURN
OPTION
Option Menu
Brightness
Play Folder
Drive Select
Contents Select
Colour
Operation guide
Change the setting option
: Error display
Viewing Mode
Follow the operation guide to perform available
Adjust the intensity bar
operations in Movie mode.
Contrast
INFO
To display / hide the operation guide and
Access the submenu
information banner during playback
Child Lock
To playback all movies in the selected title folder
R
Note
A different menu will be displayed in the mode of Media
To playback the selected file in the title folder
Player (p. 8 - 9).
Only available items can be selected.
Select the title
Select the file
Play
R
OK
OK
Folder view
[ Viewing Mode]
[Option Menu]
Sets preset picture mode for each input.
Contains [Video Setup Menu] to set up Movie mode.
[Dynamic]: Improves contrast and sharpness.
While in thumbnail view:
[Normal]: For viewing in a normal lighting condition.
[Repeat]
[Cinema]: Improves the performance of contrast, black
Playback repeat within the title [Off] / [On]
and colour reproduction.
–
[True Cinema]: Reproduces the original image quality
USB
Only the selected folder will be repeated.
precisely without any revision.
Contents Select
During movie playback:
[Game]: For viewing when playing games
[Multi Audio]
–
Not valid on TV mode.
Selects the sound tracks (if available)
–
To display a continuous record of time spent using
[Subtitle]
Game mode
Selects the subtitle (if available)
In each Viewing Mode, [Contrast], [Brightness], [Colour],
INFO
[Off] / [Subtitle1] (/ [Subtitle2] ...)
[Sharpness], [Tint], [Colour Balance], [Eco Mode], [P-NR]
and [3D-COMB] can be adjusted and stored for each input.
[Aspect Change]
[16:9] / [14:9] / [Just] / [4:3] / [4:3 Full] / [Zoom1] /
[Backlight] / [Contrast] / [Brightness] / [Colour] /
[Zoom2] / [Zoom3]
[Sharpness]
–
You can also change the aspect using the ASPECT
Adjusts the levels of these options to your preference.
button.
9
1/28/2014 10:45:10 AM
TH-32A400_408_409_410KGMX_EN.indd 9
USB Flash Memory
Unusual image is displayed
Turn the TV off with Mains power On / Off switch, then
For playing back in Media Player
turn it on again. If the problem persists, initialise all
settings
Format: FAT16, FAT32
Compliance:
Pictures from equipment connected via HDMI
Supports only USB1.1 or USB2.0 standard.
are unusual
Maximum USB capacity supported is 16GB.
Check the HDMI cable is connected properly.
USB Hub or card adapter is not supported.
Turn the TV and equipment off, then turn them on
Note
again.
Check an input signal from the equipment (p. 12).
/
Data modified with a PC may not be displayed.
Use equipment compliant with EIA/CEA-861/861D.
Do not remove the device while the TV is accessing data.
Otherwise this can damage the device or TV.
Do not touch the pins on the device.
Sound
Insert the device in the correct direction. Otherwise this
can damage device or TV.
No sound is produced
Electrical interference, static electricity, or erroneous
Check the sound mute setting (p. 6) and volume.
operation may damage the data or device. Panasonic is
Low level or distorted sound
not liable for any deterioration or damage of data or device
Sound signal reception may be deteriorated.
during operations with the TV.
Set [MPX] (p. 10) in the Sound Menu to [Mono].
It is recommended to connect the USB Flash Memory
Sound output via HDMI connection is unusual
directly to the TV's USB port.
Set the sound setting of the connected equipment to
Some USB devices or USB HUB may not be used with
"2ch L.PCM".
this TV.
Check the [HDMI1 / 2 Input] setting in the Sound Menu
You cannot connect any devices by using USB card
(p. 10).
reader.
If digital sound connection has a problem, select
Additional information for USB devices may be on the
analogue sound connection (p. 12).
following website. (English only)
http://panasonic.jp/support/global/cs/tv/
General
The TV goes into Standby mode
Troubleshooting
This TV is equipped with auto power standby function
(p. 12)
Before requesting service or assistance, please follow these
The remote control does not work or is
simple guides to resolve the problem.
If an error message appears, follow the message's
intermittent
instructions.
Replace the batteries (p. 4).
Point the remote control directly at the remote control
If the problem still persists, please contact your local
Panasonic dealer for assistance.
signal receiver of the TV (within about 7 m and 30
degree angle).
Screen
Situate the TV away from sunshine or block sources
of bright light from shining on the remote control signal
Red, blue, green or black spots on the screen
receiver of the TV.
This is the characteristic of liquid crystal panels. The
Parts of the TV become hot
liquid crystal panel is built with very high precision
Even if the temperature of parts of the front, top and
technology. Occasionally, a few non-active pixels may
rear panels has risen, these temperature rises do not
appear on the screen as points of red, green, blue or
cause any problems in terms of performance or quality.
black. This does not affect the performance of your TV
and it is not a quality problem.
The LCD panel moves slightly when it is
pushed with a finger
Chaotic image, noisy
Set [P-NR] in the Picture Menu to remove noise
Clattered sound might be heard
(p. 10).
There is some flexibility around the panel to prevent
Check nearby electrical products (car, motorcycle,
damage. This is not a malfunction.
fluorescent lamp).
Overcurrent error message appears
No image is displayed
The connected USB device might cause this error.
Check the settings of [Contrast], [Brightness] or [Colour]
Remove the device and turn the TV off with Mains
in the Picture Menu (p. 9).
power On / Off switch, then turn it on again.
Check the TV is in AV mode. If the TV is in AV mode,
Check foreign objects are not inside the USB port.
check the selected input mode match the output of the
external equipment (p. 7).
Blurry or distorted image
(no sound or low volume)
Resets channels
[Auto Tuning] or [Manual Tuning]
(p. 11)
13
[Tint]
Adjusts the picture hue.
For NTSC signal, Component or HDMI input
[Colour Balance]
Sets the overall colour tone of the picture.
[Cool] / [Normal] / [Warm]
Not valid when [Viewing Mode] is set to [True Cinema]
[Channel Colour Set]
Adjusts the suitable colour density from 3 levels for each
channel.
Select the channel to adjust and set this function.
Main Menu
[ Eco Mode]
Automatic Brightness Control function
OK
Adjusts picture settings automatically depending on ambient
lighting conditions [Off] / [On]
[P-NR] (Picture Noise Reduction)
Reduces unwanted picture noise and flicker noise in the
contoured parts of a picture [Off] / [Min] / [Mid] / [Max]
[3D-COMB]
Makes still or slow moving pictures more vivid [Off] / [On]
1/2
Occasionally, while viewing still or slow moving pictures,
Dynamic
Select
100
colour patterning may be seen. Set to [On] to display
OK
sharper and more accurate colours.
50
0
For PAL or NTSC signal reception only.
50
Not valid on Component, HDMI and Media Player.
[Reset to Defaults]
Press OK to reset the present picture [Viewing Mode] of the
Dynamic
selected input to the default settings.
Change /
OK
adjust
50
Sound Menu
Access
OK
Access
[Mode]
Sets preset sound mode. The selected mode affects all
input signals.
[Music] : Improves sound quality for watching music
videos, etc.
[Speech] : Improves sound quality for watching news,
drama, etc.
[User]: Adjusts the sounds manually by using the
Picture Menu
equaliser
–
For the User mode, [Equaliser] will appear on the Sound
Menu instead of [Bass] and [Treble]. Select [Equaliser]
and adjust the frequency
(below).
In Music and Speech modes, you can adjust [Bass] and
[Treble] settings, and those settings will be stored for
each mode.
[Bass] / [Treble]
Adjusts the effect to your preference.
[Equaliser]
Select the frequency and change the frequency level by
using the cursor buttons.
[Playing Time Display] (p. 11).
This function is available when [Mode] is set to [User].
To enhance the bass sound, raise the level of the lower
frequency. To enhance the treble sound, raise the level of
the higher frequency.
To reset the levels of each frequency to the default
settings, select [Reset to Defaults] by using the cursor
button, and then press the OK button.
1/28/2014 10:45:10 AM
TH-32A400_408_409_410KGMX_EN.indd 10
Specifications
Model no.
[Shipping Condition] (p. 11)
TH-32A400G
TH-32A410G
TH-32A400K
TH-32A410K
TH-32A400X
TH-32A410M
TH-32A408K
TH-32A410X
TH-32A409K
Power source
A400G/K, A408K, A409K, A410G/K series:
AC 220 - 240 V, 50/60 Hz
A400X, A410M/X series:
AC Auto 110 - 240V, 50/60 Hz
Power consumption (Rated power / Standby power)
A400G/K, A408K, A409K, A410G/K series:
57 W / 0.35 W
A400X, A410M/X series:
58 W / 0.35 W
Display panel
Panel
TFT LCD Module with LED Backlight
Visible screen size (diagonal)
80 cm
Display resolution
1,366 (W) × 768 (H)
Dimensions (W × H × D)
A400, A408, A409 series:
734 mm × 477 mm × 184 mm (With Pedestal)
734 mm × 437 mm × 69 mm (TV only)
A410 series:
734 mm × 502 mm × 184 mm (With Pedestal)
734 mm × 437 mm × 69 mm (TV only)
Mass
5.5
(With Pedestal)
5.0
(TV only)
Connection terminals
AV IN / AV1 IN (COMPONENT / VIDEO)
VIDEO
RCA PIN Type × 1, 1.0 V[p-p] (75 )
AUDIO L - R
RCA PIN Type × 2, 0.5 V[rms]
Y
1.0 V[p-p] (including synchronisation)
P
, P
B
R
±0.35 V[p-p]
AV2 IN (A410M/X only)
VIDEO
RCA PIN Type × 1, 1.0 V[p-p] (75 )
AUDIO L - R
RCA PIN Type × 2, 0.5 V[rms]
HDMI 1 / 2* input
TYPE A Connectors
USB
USB 2.0 TYPE A Connectors
DC 5 V, Max. 500 mA
[Balance]
[Display Settings]
Adjusts volume level of right and left speakers
[Input Labels]
[ Surround]
Accesses the input labels list to select the label of each
input mode or set to skip unconnected one for easier
Surround sound settings [Off] / [On]
identification and selection in [Input Selection] (p. 7)
[Auto Gain Control]
or banner
Automatically regulates large sound level differences
–
To skip the input mode, select [Skip].
between channels and inputs [Off] / [On]
[Banner Display Timeout]
[ Volume Correction]
Sets how long the Information banner stays on screen
Adjusts the volume of individual channel or input mode
(p. 6) [0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] /
[Speaker Distance to Wall]
[7] / [8] / [9] / [10] (seconds)]
Compensates for the low frequency sound due to the
[Playing Time Display]
distance between the speakers and the wall [Up to 30cm] /
Set to [On] to display a continuous record of time spent
[Over 30cm]
using Game mode every 30 minutes [Off] / [On]
If the back space between the TV and wall is over 30 cm,
–
This function is available when [Viewing Mode] is set
[Over 30cm] is recommended.
to [Game].
If the back space between the TV and wall is within 30 cm,
[System Menu]
[Up to 30cm] is recommended.
[Shipping Condition]
[ MPX]
Resets all settings to the original condition.
Selects multiplex sound mode (if available)
–
Access this function and follow the on-screen
[Stereo]: Use this normally
instructions to complete the procedures.
[Mono]: When stereo signal cannot be received
–
Initial Setup will automatically start after [Shipping
[M1] / [M2]: Available while mono signal is transmitted
Condition] completes
(p. 6).
[HDMI1/2 Input]
[Software Licence]
Selects to fit the input signal (p. 12)
Displays the software licence information of the TV.
[Digital]: When sound is carried via the HDMI cable
[System Information]
connection
Displays the system information of the TV.
[Analogue]: When sound is not carried via the HDMI-DVI
adaptor cable connection
[Other Settings]
For HDMI input
[Colour System]
[Reset to Defaults]
Selects optimum colour system based on video signals in
Press OK to reset the present settings of [Mode], [Balance]
AV mode [Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]
and [Surround] to the default.
[Colour Matrix]
Adjusts suitable colour parameters for [SD] (standard
definition) or [HD] (high definition)
–
[SD]: Input signal is a normal TV system
Setup Menu
–
[HD]: Input signal is a high de nition system
•
Available only with 480p or 576p input on video
[Off Timer]
signals in a natural colour from digital equipment
Sets the time until the TV automatically goes to Standby
connected to AV1 component or HDMI1 / HDMI2
mode [Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)
terminals.
[Child Lock]
[Auto Standby]
Locks channels / AV input modes
Sets the duration of time that the TV will remain on when
Enter the PIN number (4 digits) to access.
no operation is performed [Off] / [2] / [4] (hours)
First setting:
–
Automatic input switching with the connected
On the [Child Lock-PIN Entry] screen, enter your preferred
equipment affects this function and time-count will be
number twice to create the PIN.
reset.
–
The noti cation message will appear 3 minutes before
[Change PIN]
Lets you change your PIN number.
going into Standby mode.
–
Enter a new PIN number twice.
[Power Save]
–
Performing [Shipping Condition] erases the PIN number
Reduces brightness of picture to economise on power
and all settings.
consumption [Off] / [On]
[Child Lock List]
[16:9 Overscan]
Displays the Child Lock List.
Selects the screen area displaying the image
–
From the list, selects the channel / input to be locked.
–
[On]: Enlarges the image to hide the edge of the
[Tuning Menu]
image.
–
[Off]: Displays the image in the original size.
(p. 11)
•
Set to [On] if noise is generated on the edge of the
[OSD Language]
screen.
Changes language for on-screen displays
(p. 6)
This function is available when aspect is set to [16:9].
•
•
This function can be memorised separately for SD
(Standard definition) and HD (High definition) signals.
10
1/28/2014 10:45:11 AM
TH-32A400_408_409_410KGMX_EN.indd 11
AUDIO OUT
Maintenance
RCA PIN Type × 1, 0.5 V[rms]
First, remove the mains plug from the socket
Sound
outlet.
Audio output
20 W (10 W + 10 W)
Regular care
Receiving systems / Band name
Gently wipe the surface of the display panel, cabinet and
pedestal by using a soft cloth.
17 Systems
Wipe the mains plug with a dry cloth at regular intervals.
Systems
Function
Moisture and dust may lead to fire or electrical shock.
1 PAL B, G, H
For stubborn dirt
2 PAL I
3 PAL D, K
Reception of broadcast
First clean the dust on the surface. Dampen a soft cloth
transmissions and
4 SECAM B, G
with clean water or diluted neutral detergent (1 part
5 SECAM D, K
Playback from Video
detergent to 100 parts water). Wring the cloth and wipe the
6 SECAM K1
Cassette Tape Recorders
surface. Finally, wipe away all the moisture.
7 NTSC M
Caution
(NTSC 3.58/4.5 MHz)
Do not use a hard cloth or rub the surface too hard as
8 NTSC 4.43/5.5 MHz
this could scratch the surface.
9 NTSC 4.43/6.0 MHz
10 NTSC 4.43/6.5 MHz
Do not subject the TV's surfaces to water or detergent.
Playback from Special
11 NTSC 3.58/5.5 MHz
Liquid inside the TV could lead to product failure.
VCR's or DVD
12 NTSC 3.58/6.0 MHz
Do not subject the surfaces to insect repellent, solvent,
13 NTSC 3.58/6.5 MHz
thinner or other volatile substances. This may degrade
14 SECAM I
surface quality or cause peeling of the paint.
Playback from Special
15 PAL 60 Hz/5.5 MHz
The surface of the display panel is specially treated and
16 PAL 60 Hz/6.0 MHz
Disc Players and Special
may be easily damaged. Take care not to tap or scratch
17 PAL 60 Hz/6.5 MHz
VCR's or DVD
the surface with your fingernail or other hard objects.
Do not allow the cabinet and pedestal to make contact
Receiving channels
with a rubber or PVC substance for a long time. This may
degrade surface quality.
VHF BAND
2-12 (PAL/SECAM B, K1)
0-12 (PAL B AUST.)
1-9 (PAL B N.Z.)
Licence
1-12 (PAL/SECAM D)
1-12 (NTSC M Japan)
This product incorporates the following software:
2-13 (NTSC M USA)
(1) the software licensed under the GNU General
UHF BAND
Public License, Version 2.0 (GPL V2.0),
21-69 (PAL G, H, I/SECAM G, K, K1)
(2) the software licensed under the GNU LESSER
28-69 (PAL B AUST.)
General Public License, Version 2.1 (LGPL V2.1),
13-57 (PAL D, K)
and/or
13-62 (NTSC M Japan)
(3) open sourced software other than the software
14-69 (NTSC M USA)
licensed under the GPL and/or LGPL.
CATV
S1-S20 (OSCAR)
The software categorized as (1) - (3) are distributed
1-125 (USA CATV)
in the hope that it will be useful, but WITHOUT ANY
C13-C49 (JAPAN)
WARRANTY, without even the implied warranty of
S21-S41 (HYPER)
MERCHANTABILITY or FITNESS FOR A PARTICULAR
Z1-Z37 (CHINA)
PURPOSE. Please refer to the detailed terms and
5A, 9A (AUST.)
conditions thereof shown in the "Software License"
menu on this product.
Aerial input
At least three (3) years from delivery of this product,
VHF / UHF
Panasonic Corporation will give to any third party
who contacts us at the contact information provided
Operating conditions
below, for a charge no more than our cost of physically
performing source code distribution, a complete
Temperature
0 °C - 40 °C
machine-readable copy of the corresponding source
code covered under GPL V2.0, LGPL V2.1 or the other
Humidity
licenses with the obligation to do so, as well as the
20 % - 80 % RH (non-condensing)
respective copyright notice thereof.
Note
Contact Information: cdrequest@unipf.jp
Design and Specifications are subject to change without
The source code and the copyright notice are also
notice. Mass and Dimensions shown are approximate.
available for free in our website below.
http://www.unipf.jp/dl/ATV13AR/
* HDMI 2 input is available for A410 series only.
14
Using the [Tuning Menu]
[Tuning Menu] lets you retune your TV, skip unwanted
channels, etc.
TV mode only
[Channel List Edit]
Hides unwanted channels. The hidden channels cannot be
displayed except in this function.
Select a channel, then reveal / hide
Channel List Editor
: [reveal]
: [hide] (skip)
[Tune]
Retunes each channel (Manual Tuning).
R
Channel List will be set to [Tune].
[Reveal all]
Reveals all hidden channels.
Y
Channel List will be set to [Reveal all].
[Auto Tuning]
Scans and stores all channels automatically.
Auto Tuning
All tuning data will be erased
Start Auto Tuning
EXIT
RETURN
If tuning has not been done completely
[Manual Tuning] (below)
[Manual Tuning]
Scans and stores channels manually.
Manual Tuning
1
CH57
Fine Tuning
Manual Tuning
0%
100%
Sound System
B/G
Colour System
Auto
1
Set [Sound System] and [Colour System].
•
Normally set [Colour System] to [Auto].
2
Select a channel position to store the channel.
•
If a VCR is connected only with the RF cable, select
channel position [0].
3
Start tuning.
Tuning stops when a channel is found.
•
4
Press OK to store the channel or press the cursor
button to continue tuning.
[Fine Tuning]
Refines the tuning of a channel.
11
1/28/2014 10:45:11 AM
HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United
States and other countries.
Manufactured under
license from Dolby
Laboratories. Dolby and
the double-D symbol
are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS,
the Symbol, & DTS and the Symbol together are
registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
RealMedia, RealVideo and
RealAudio are trademarks
or registered trademarks of
RealNetworks, Inc.
These statements are under the Licence Agreement
with RealNetworks, Inc.
4.4.2.1 Terms of use must prohibit the user from
modifying, translating, reverse engineering,
decompiling, disassembling or using other means
to discover the Source Code or otherwise replicate
the functionality of the Client Code, except to the
extent that this restriction is expressly prohibited by
applicable law.
4.4.2.2 Terms of use must effectively disclaim on
behalf of Real all warranties and conditions other
than those set forth in this Agreement, express and
implied, including implied warranties or conditions
of merchantability and fitness for a particular
purpose; and effectively exclude all liability for
indirect, special, incidental and consequential
damages, including but not limited to lost profits or
replacement systems.
(Only supported by A408K, A409K, A400K and
A410K/M series)
Windows is a registered trademark of Microsoft
Corporation in the United States and other
countries.
Even if no special notation has been made of company
or product trademarks, these trademarks have been
fully respected.
15
Advertisement
