Installing A Wall-Mount Bracket - Hisense 55T770DW User Manual

4
ScrewC (M5 × L12)

Installing a Wall-Mount Bracket

If you want to attach the TV to a Wall-Mount bracket (not provided), you should first remove the stand if it is pre-attached (see
Step 1).
1
1. Make sure the TV is laid face-down on a clean, safe,
and cushioned space, remove the original screws in the
bracket holes on the TV back over.
WARNING
Use only the 4 screws (M6
3. Follow instructions provided with the Wall-Mount bracket.
If you are not sure of your ability to do complete the installation, contact a professional installer or service technician for
assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect
assembly.
The selected screws are 6.5 ~ 7.5 mm in length when measured from the attaching surface of the TV's rear cover. The
diameter and length of the screws differ depending on the Wall-Mount Bracket model.
6.5 ~ 7.5 mm
the TV's rear cover
Getting Started
L25) provided with the TV to prevent internal damage to the TV set or cause it to fall.
×
Wall-Mount Bracket
Screw
Spacer
4. Carefully place your TV on a soft, cushioned, surface to
prevent damage to the screen.
Align the stand cover with the screw holes on the bottom
of TV back, secure the stand to the TV with the four
provided Screws C. See Figure 4.
2
Spacer × 4
2. Place the provided spacers in the corresponding bracket
holes. Attach purchased bracket (1.5 ~ 2.5 mm thickness)
on the TV with 4 screws (M6
bag. Follow instructions provided with the wall bracket.
Wall-Mount hole pattern VESA (mm)
Wall-Mount screw size (mm)
4
Bracket
(1.5~2.5mm)
ScrewD (M6 × L25)
L25) which in accessories
×
400 × 400
M6