FCC RADIO FREQUENCY INTERFERENCE STATEMENT NOTE This equipment has been tested and found to comply with the limits for a Class B computing device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
SAFETY CERTIFICATIONS TABLE OF CONTENTS UL/CUL: Listed to Safety of Information Technology Equipment, including FCC Radio Frequency Interference Statement ............ ii Electrical Business Equipment. Limited Lifetime Warranty .................. ii About the Access Converter/3 ................1 CE: The products described herein comply with the Council Directive on Installing the Access Converter/3 ...............
NOTES: SPECIFICATIONS DC Input Voltage: AC Adapter Input Load: 100/240 ±10% VAC, 0.25A, 50/60 Hz, 5 VDC output with maximum output current of 1A Unit Power Consumption (Typical): 600 mA @ 5 Operating Temperature: 32° to 122° F (0° to 50° C) Storage Temperature: -4°...
Page 5
Fiber Uplink Port ABOUT THE ACCESS CONVERTER/3 The LED indicator for the fiber uplink port is located on the RJ-45 connector of the The Access Converter/3 is a 10/100 auto-negotiating, switching, optical access downlink port next to the power connector. There are four LED functions for the product.
INSTALLING THE ACCESS CONVERTER/3 LED OPERATION Install the Access Converter/3 as a table-top device, or mount to a wall surface with Each Access Converter/3 includes diagnostic LEDs for troubleshooting. the appropriate bracket (included). To wall mount, use the supplied screws to attach the wall-mount bracket to the Access Converter/3, then simply mount the Fiber Uplink TX Downlink LED...