USER INSTRUCTIONS The trailer is designed and constructed to provide a portable, comfortable and sturdy addition to your outdoor ventures. Please read the instruction and all warnings carefully before using and keep the instruction for future reference. IMPORTANT PASSENGERS AND RIDERS SHOULD ALWAYS WEAR PROPERLY FITTING, APPROVED CYCLING HELMETS WARNING Failure to follow these warnings and assembly instructions could result in serious injury or death.
Page 3
and the safety strap wrapped around the stay and the hook snapped into the D-ring • The person riding the towing bicycle should be at least 16 years of age & in good physical condition. • Be sure that the bicycle used with the trailer is in good working condition and has good brakes. A bicycle shop can help you with inspection and maintenance.
EXPLODED VIEW FOR CLARIFICATION ONLY PART LIST NUMBER NAME QUANTITY NUMBER NAME QUANTITY Base Tube Reflector Side Tube Safety Pin Axle 20” Rear Wheel Hitch Arm Spoke Reflector Hitch Clamp Fabric Bottom Button hook Mesh Canopy Wheel Axle Seat Pad Knob Flagpole &...
FOLDING AND UNFOLDING OF THE TRAILER Remove trailer and all components from carton and sort all contents. Unfold the retractable mesh canopy of trailer by hand to the upright position. Insert the safety pins into the bottom sleeves. Operate it in the opposite order to fold the frame. CAUTION The seat is not suitable for children under 12 months.
WARNING To protect children from flying objects during pulling, always close the retractable mesh canopy. When using the wind/rain cover make sure there is proper ventilation for the children inside. Passengers can become hot inside fully closed trailer during very hot weather. Please make sure to open the roll-up vents to prevent overheating.
ATTACHING AND REMOVING THE WHEELS Lift the rear of the frame enough to allow you to insert the hub axle into wheel axle of the trailer. Insert the hub axle all the way by pushing on the hub until you hear an audible click. Check that the axle is secured and inserted fully by grabbing the center of the hub and pulling away from trailer.
INSERTING AND REMOVING THE FLAG Assemble the two sections of the flagpole together. Insert the flagpole into the sewn sleeve on the left rear corner of the trailer. CAUTION Always use the safety flag to maximize your visibility to other vehicles sharing the road or path.
D-ring attached to the hitch arm. Operate it in the opposite order to remove the hitch arm from the bike. PLEASE NOTE: - Optional AVENIR Axle Mount Quick Release hitch part# 72-27-008 also available. CAUTION The height of the hitch clamp shall not exceed 400 mm above a road surface and the standard drawbar load shall be between 30N and 80N.
DISASSEMBLY, FOLDING AND STORAGE For partial or complete disassembly, folding and storage, reverse the above-mentioned process. Inspect the trailer and its parts before and after each use and storage. Check the working conditions of both trailer and bike before each use. Store trailer in a dry area under ambient conditions and always make sure trailer is dry before storing.
Need help?
Do you have a question about the Dome Trailer and is the answer not in the manual?
Questions and answers