Sirius Satellite Radio XM Dock & Play PowerConnect User Manual page 32

Vehicle Installation
Sedan/Coupe With the Antenna Placed at the Front of the Roof:
Feed the antenna cable from the antenna underneath the rubber
molding around the windshield. Use a blunt plastic putty knife or
similar blunt tool to lift the rubber molding around the windshield
and tuck the antenna cable underneath the molding. Route the
antenna cable around and down the windshield to the lowest point.
At the lowest corner of the windshield, route the cable out of the
windshield molding and into the rubber weather stripping around
the door opening. Lift
the weather stripping
from the opening and
tuck the cable inside it,
then replace the weather
stripping. Run the cable
inside of the weather
stripping to the bottom of
the door opening.
Pull the cable out of the
weather stripping at the bottom of the door opening and route it
under the carpet toward the dashboard. Coil any excess cable in a
hidden location, such as under the carpet, keeping it away from any
vehicle pedals or controls. Secure the excess cable with wire ties.
Bring the end of the cable out at the PowerConnect Vehicle Dock
location. Leave yourself enough cable so you can easily connect it
to the antenna connector of the dock.
Continue with uStep 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter" on page 37.
32