Download Print this page
Soleus Air HC4-15-32 Operating Instructions Manual

Soleus Air HC4-15-32 Operating Instructions Manual

Safe ptc ceramic heater

Advertisement

Quick Links

Safe PTC Ceramic Heater
Model No: HC4-15-32
Operating Instructions
HC4-15-32
© 2006 Soleus Air International

Advertisement

loading

Summary of Contents for Soleus Air HC4-15-32

  • Page 1 Safe PTC Ceramic Heater Model No: HC4-15-32 Operating Instructions HC4-15-32 © 2006 Soleus Air International...
  • Page 2: Important Instructions

    Thank you for choosing a Soleus Air Safe PTC Ceramic Heater. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater.
  • Page 3: Specifications

    14. To avoid fire or shock hazard, plug the unit directly into a 120 V AC electrical outlet. 15. To disconnect heater, turn controls to OFF, then remove plug from outlet. Pull firmly on the plug, DO NOT unplug by pulling on the cord.
  • Page 4: Product Diagram

    PRODUCT DIAGRAM Control Panel Cover Heat Setting Dial Thermostat Dial Power Indication Light Ceramic Heating Element & Grill...
  • Page 5 OPERATING INSTRUCTIONS Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate the heater when it is in the upright position. Use the instructions below to operate the heater using the control panel or the included remote control.
  • Page 6: Maintenance

    MAINTENANCE WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING. CLEANING: IMPORTANT! DO NOT IMMERSE HEATER IN WATER! Clean the heater grills using the vacuum brush attachment on your vacuum cleaner. This will remove lint and dirt from the inside of the heater. DO NOT ATTEMPT TO TAKE HEATER APART.
  • Page 7: Warranty

    One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air HC4-15-32 Ceramic Heater to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States.