Using The Digital Zoom Function; Using The Freeze Function - Panasonic PT-VW345NZ Operating Instructions Manual

Chapter 3 Basic Operations - Basic operations by using the remote control

Using the DIGITAL ZOOM function

(Only for still image-based computer (RGB) and still image-based HDMI signals input)
You can enlarge the center area. You can also change the location of the area to be enlarged.
buttons
1) Press the <D.ZOOM +> or < D.ZOOM -> button on the remote control.
f The moving screen is displayed.
f The [DIGITAL ZOOM] individual adjustment screen is displayed when executing the menu operation. For details, refer
to [DISPLAY OPTION] → [OTHER FUNCTIONS] (
f Pressing the <RETURN> button to cancel the function.
r Button functions during [DIGITAL ZOOM]
Operation menu
r Button functions of moving screen
Operation menu
f When you have executed the operation of remote control directly, the individual adjustment screen is not be displayed
and the operation menu of the moving screen is displayed. At this time, you can adjust the magnification by using the
<D.ZOOM +> or <D.ZOOM -> button on the remote control.
Note
f Magnification can be set from 1.0x to 3.0x in 0.1 increments.
f When press the <MENU> button during [DIGITAL ZOOM], the DIGITAL ZOOM function will be cancelled.
f When the input signals change during [DIGITAL ZOOM], the DIGITAL ZOOM function will be cancelled.
f When [DIGITAL ZOOM] is active, the FREEZE function is not available.

Using the FREEZE function

You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the external device.
button
1) Press <FREEZE> button on the remote control.
f The video is paused and the audio is muted. [FREEZE] is displayed on the lower left of the screen during FREEZE.
2) Press <FREEZE> button again.
f The video playback resumes and the audio is unmuted.
Note
f When no signal input, [KEY NOT APPLICABLE] message will appear.
f When [MIC] is set to [ON], the audio of MIC can be output even during FREEZE.
50 - ENGLISH
Æ
page 73).
Operation
Press the <D.ZOOM +>
Increases magnification.
button or w button.
Press the <D.ZOOM ->
Decreases magnification.
button or q button.
Operation
Press the as buttons. Moves the area to the top or the bottom.
Press the qw buttons. Moves the area to the left or the right.
ABC
ABC ABC
ABC
ABC
Adjustment Adjustment range
Adjustment
1.0 ~ 3.0