1. Manuals
  2. Brands
  3. ABS Manuals
  4. Security Camera
  5. MegaCam 312M
  6. User manual

ABS MegaCam 311M User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for ABS MegaCam 311M

Summary of Contents for ABS MegaCam 311M

  • Page 2 ABS MegaCam 311M/312M Series Network Camera User’s Manual Owner's Record The model and serial numbers are located at the bottom of device. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your dealer regarding this product.
  • Page 3 ABS MegaCam 311M/312M Series Network Camera User’s Manual Declaration of Conformity This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 4: Table Of Contents

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Table of Contents Overview ..........................6 Introduction......................... 6 Features ........................6 Minimum System Requirements................. 7 Package Contents........................ 8 Connections and Outlook....................9 Hardware Installation....................... 11 Preparation ........................13 Search and Set up by IPWizard................. 13 Search........................
  • Page 5 ABS MegaCam 311M/312M Series Network Camera User’s Manual Date & Time....................42 Maintenance....................44 Video: Configure profile ................... 46 General...................... 46 MPEG4/VGA.................... 47 MPEG4/QVGA..................48 MPEG4/QQVGA..................49 Video/JPEG....................50 MEGA MPEG4..................50 MEGA JPEG..................... 51 Audio: Audio parameters .................. 53 User: Manage user name, password and login privilege ........

  • Page 6: Overview

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Overview This user’s guide explains how to operate the Mega-pixel Network Camera from a computer. User should read this manual completely and carefully before you operate the device. Introduction This camera is an inexpensive and fully scalable surveillance device. Because the Network Cameras can be plugged into your existing local area network (LAN), you will potentially save thousands of dollars from unnecessary cabling.

  • Page 7: Minimum System Requirements

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Voice alerting while motion triggered Image transmission using an FTP or e-mail for event DDNS and PPPoE Support UPnP device discovery and NAT router transversal Multi-channel control software for surveillance application On-line firmware upgrade Minimum System Requirements Microsoft Internet Explorer 6.0 or later...

  • Page 8: Package Contents

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Package Contents User can find the following items in the package: Item Descriptions 1. Camera is the main element of the product package. (The color of the camera may vary) 2. Camera Stand with screws 3.

  • Page 9: Connections And Outlook

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Connections and Outlook DC Power Jack LAN Socket Factory Audio Default Reset Output Jack LAN Socket The LAN socket is a RJ-45 connector for connections to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission speed of the network automatically.
  • Page 10 ABS MegaCam 311M/312M Series Network Camera User’s Manual IR LEDs Network Microphone Accessing Type LED Microphone The Network Camera has built-in an internal microphone. This microphone is hidden in the pinhole located on the front panel. IR LEDs These LEDs are Infra-Red type. It’s very useful for low-lux environment to provide extra light source for image sensor.

  • Page 11: Hardware Installation

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Hardware Installation 1. Attach the Camera with the included stand 2. Place the Camera on the table or fix it onto ceiling or wall Use three screws to fix the Network Camera onto the ceiling or wall. You could also put the Network Camera on the table directly.

  • Page 12: Power Cable

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Ethernet Cable 4. Connect the external power supply to Camera Connect the attached power adapter to the DC power jack of the Network Camera. Note: Use the power adapter, 5VDC, included in the package and connect it to wall outlet for AC power.

  • Page 13: Preparation

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Preparation Search and Set up by IPWizard When you installed the Camera on a LAN environment, you have two easy ways to search your Cameras by IPWizard or UPnP discovery. Here is the way to execute IPWizard to discover Camera’s IP address and set up related parameter in a Camera.

  • Page 14: Wizard

    ABS MegaCam 311M/312M Series Network Camera User’s Manual If IPWizard finds network devices, Wizard button will be available. Please select the device you want to set-up or connect and click the left button of the mouse on the Information Box. The words on the Information Box will turn from white to yellow which means this device is selected.
  • Page 15 ABS MegaCam 311M/312M Series Network Camera User’s Manual selected device. Further procedures can be carried out when device is available on the LAN. After pressing Installation Wizard, please key in authorized username of the device and password when login dialog box appears on the screen. You can login the setting page if authorized name and password is approved.
  • Page 16 ABS MegaCam 311M/312M Series Network Camera User’s Manual Wizard page 3: Confirmation This page shows the information of the selected device to check if there is any mistake or not. If it is correct, please press “Submit” button and the setting information will be uploaded to the selected device.

  • Page 17: Using Upnp Of Windows Xp Or Vista

    ABS MegaCam 311M/312M Series Network Camera User’s Manual ® Using UPnP of Windows XP or Vista UPnP™ is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. This device is an UPnP enabled device. If the operating system, Windows XP or Vista, of your PC is UPnP enabled, the Network Camera will be very easy to be found.

  • Page 18: Install The Device Behind A Nat Router

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Install the Device behind a NAT Router Once installed, the device is accessible on your LAN. To access the device from the Internet you must configure your broadband router to allow incoming data traffic to the device.

  • Page 19: Access The Device From The Internet Explorer For The First Time

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Access the device from the Internet Explorer for the first time Start the web browser on the computer and type the IP address of the Network Camera you want to monitor as below: The Login Window of the Network Camera is prompted: Type in your login name and password under “USERNAME”...

  • Page 20: Logging In As An User

    ABS MegaCam 311M/312M Series Network Camera User’s Manual According your browser’s security setting, the IE Web Page may prompt the “Security Warning” window. If so, select “Yes” to install and run the ActiveX control onto your PC. Otherwise, the system will load the ActiveX silently.

  • Page 21: Operating The Network Camera

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Operating the Network Camera Start-up screen will be as follow no matter an ordinary users or an administrator. ActiveX Control Video Profile Streaming Protocol Language Setting Menu Monitor Image Section Monitor Image Section The image shot by the device is shown here.

  • Page 22: Streaming Protocol

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Streaming Protocol User can select proper streaming protocol according to networking environment. Language The device could provide multiple languages to meet customer’s requirement. ActiveX Control The plug-in ActiveX control supports a lot of functions by clicking the left mouse button.

  • Page 23: Digital Zoom

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Digital Zoom Click Digital Zoom to active this function as above. User can drag or scale the box over the video to adjust zoom ratio and position. Record www.abs.com 23/85...

  • Page 24: Snapshot

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Click Record to activate this function. Press Record button to start recording. The video file is saved as ASF format into your local PC. While you want to stop it, press Stop to stop recording.

  • Page 25: Volume

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Volume Click Volume to activate this function. There are two control bars for speaker and microphone volume respectively. Scroll these control bars to adjust the audio attribute. Check the volume mute will mute the speaker output.

  • Page 26: About

    ABS MegaCam 311M/312M Series Network Camera User’s Manual About Click About to show this ActiveX information. www.abs.com 26/85...

  • Page 27: Administrating The Device

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Administrating the Device System Setting This function is only available for user logged into Network Camera as administrator. Click on each menu name to display its setting page. Item Action Network Configure Network settings such as DHCP, DDNS, 3GPP, PPPoE...
  • Page 28 ABS MegaCam 311M/312M Series Network Camera User’s Manual MAC address: Displays the Ethernet MAC address of the device. Note that user can not change it. Obtain IP address automatically (DHCP): DHCP: Stands for Dynamic Host Configuration Protocol. Enable this checked box when a DHCP server is installed on the network to issue IP address assignment.

  • Page 29: Wireless

    ABS MegaCam 311M/312M Series Network Camera User’s Manual could assign the second port number of http protocol, and the WAN users should follow the port number to login. If the http port is not assigned as 80, users have to add the port number in back of IP address.
  • Page 30 ABS MegaCam 311M/312M Series Network Camera User’s Manual SSID: This is the name of the wireless network the device is configured for. The field accepts up to 32 alphanumeric characters. The name must be exactly the same as that used in the wireless access point, or the connection will not be established.

  • Page 31: Ddns Service

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Key value of WEP. WPA settings: - WPA Key: Key value of WPA. The device uses a pre-shared key (PSK) for key management. The pre-shared key can be entered either as Manual hex, as 64 hexadecimal characters, or as a Passphrase, using 8 to 63 ASCII characters.

  • Page 32: Pppoe

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Dynamic Domain Name Server is necessary. DDNS: To enable or disable the DDNS service here. Server name: Choose the built-in DDNS server. DDNSHost: The domain name is applied of this device. User name: The user name is used to log into DDNS.
  • Page 33 ABS MegaCam 311M/312M Series Network Camera User’s Manual The device can directly connect to the xDSL, however, it should be setup on a LAN environment to program the PPPoE information first, and then connect to the xDSL modem. Power on again, then the device will dial on to the ISP connect to the WAN through the xDSL modem.

  • Page 34: Streaming

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Streaming RTSP is a streaming control protocol, and a starting point for negotiating transports such as RTP, multicast and Unicast, and for negotiating codecs. RTSP can be considered a "remote control" for controlling the media stream delivered by a media server. RTSP servers typically use RTP as the protocol for the actual transport of audio/video data.
  • Page 35 ABS MegaCam 311M/312M Series Network Camera User’s Manual In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT traversal when your device is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the device.

  • Page 36: Ip Filter

    ABS MegaCam 311M/312M Series Network Camera User’s Manual IP Filter You can enter different user’s IP address which are allowing enter or denying by the device. IP Filter: To enable or disable the IP filter function here. IP Filter Policy: Choose the filter policy where is denying or allowing.
  • Page 37 ABS MegaCam 311M/312M Series Network Camera User’s Manual Type the subject/title of the E-mail. TCP Notification: If enable this functions, then the “TCP Server” and “TCP Port” field need to be filled in. TCP Server: Type the TCP Server name or the IP address of the TCP server.
  • Page 38 ABS MegaCam 311M/312M Series Network Camera User’s Manual www.abs.com 38/85...

  • Page 39: Camera: Adjust Camera Parameters

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Camera : Adjust Camera parameters Use this menu to set the functions of the camera parameters of the device. Picture Rotation: Turn the “Mirror” and “Vertical Flip” On or OFF. The image will be overturned as below.
  • Page 40 ABS MegaCam 311M/312M Series Network Camera User’s Manual White Balance: Auto: will adjust the white balance automatically. Hold: will hold the white balance. Exposure Control: Auto: will adjust the internal gain automatically. Hold: will hold the internal gain. Power Frequency: User should choose either 50 or 60 Hz to meet the power line frequency in your country.

  • Page 41: System: Configure And Maintain System

    ABS MegaCam 311M/312M Series Network Camera User’s Manual System : Configure and maintain system Use this menu to perform the principal settings of the device. System DIPS (Dynamic IP Service): To enable or disable the DIPS® (Dynamic IP Service) function.

  • Page 42: Date & Time

    ABS MegaCam 311M/312M Series Network Camera User’s Manual You can find web page as below: Enter your Device Number and press “OK” button. Then, a new web page will pop up and link to your device accordingly. You will see that DIPS is a much easier service than DDNS.
  • Page 43 ABS MegaCam 311M/312M Series Network Camera User’s Manual - Synchronize with PC: Click this option to enable time synchronization with PC time. - Manual setting: Click this option to set time and date manually. - Synchronize with NTP: Click this option if you want to synchronize the device’s date and time with those of time server called NTP server (Network Time Protocol).

  • Page 44: Maintenance

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Maintenance Default Settings (Including Network Setting): Factory Default Settings Recall the device to factory default settings. Note that pressing this button will reset all device’s parameters to the factory settings (including the IP address).
  • Page 45 ABS MegaCam 311M/312M Series Network Camera User’s Manual 2. Make sure that only you access this device while firmware updating. 3. Disable Motion Detection function. 4. Click “Browse” button. Select the Firmware binary file. (Note that it must make sure...

  • Page 46: Video: Configure Profile

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Video : Configure profile This device provides 2 modes of video profile. The first one is Mega-pixel mode which supports “Mega MPEG4” and “Mega JPEG” streams simultaneously. The second one is Multi-profile mode which supports “MPEG4/VGA”, “MPEG4/QVGA”, “MPEG4/QQVGA”, and “VIDEO/JPEG”...

  • Page 47: Mpeg4/Vga

    ABS MegaCam 311M/312M Series Network Camera User’s Manual MPEG4/VGA Video Type: It’s a MPEG4 mode in this profile. Resolution: It’s VGA mode (640x480) in this profile. Rate Control: Defines the rate control method of this profile. There are two options: Constant Bit Rate (CBR) or Variable Bit Rate (VBR).

  • Page 48: Mpeg4/Qvga

    ABS MegaCam 311M/312M Series Network Camera User’s Manual MPEG4/QVGA Video Type: It’s a MPEG4 mode in this profile. Resolution: It’s QVGA mode (320x240) in this profile. Rate Control: Defines the rate control method of this profile. There are two options: Constant Bit Rate (CBR) or Variable Bit Rate (VBR).

  • Page 49: Mpeg4/Qqvga

    ABS MegaCam 311M/312M Series Network Camera User’s Manual MPEG4/QQVGA Video type: It’s a MPEG4 mode in this profile. Resolution: It’s QQVGA mode (160x120) in this profile. Rate Control: Defines the rate control method of this profile. There are two options: Constant Bit Rate (CBR) or Variable Bit Rate (VBR).

  • Page 50: Video/Jpeg

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Video/JPEG Video type: It’s JPEG mode in this profile. Resolution: User can select VGA, QVGA, or QQVGA mode as the resolution of this JPEG profile. Rate Control: The quality level is between 1 and 100. The higher value is the better quality.

  • Page 51: Mega Jpeg

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Defines the rate control method of this profile. There are two options: Constant Bit Rate (CBR) or Variable Bit Rate (VBR). For CBR, the video bit rate is between 384kbps and 4096kbps. User can set the desired bit rate to match the limitation of bandwidth. For VBR, user should choose the quality level to set the video quality rather than bit rate.
  • Page 52 ABS MegaCam 311M/312M Series Network Camera User’s Manual Max Frame Rate: Defines the targeted frame rate of this profile. For example, set the frame rate to 5 fps, then the image will be updated for 5 frames per second as possible. User need to set reasonable max frame rate versus video quality under the limited bandwidth.

  • Page 53: Audio: Audio Parameters

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Audio : Audio parameters Audio: To enable or disable audio function Audio Mode: To select Simplex or Full duplex (2-way audio) mode Input Gain: To adjust gain of input audio Output Gain: To adjust gain of output audio www.abs.com...

  • Page 54: User: Manage User Name, Password And Login Privilege

    ABS MegaCam 311M/312M Series Network Camera User’s Manual User : Manage user name, password and login privilege Use this menu to add, update, or remove the usernames and passwords of the Administrator and viewer. Viewer login: Select “Anonymous” to allow any one viewing the video once connected. Otherwise, only users in database can view the video after login.

  • Page 55: E-Mail: Setup E-Mail Configuration

    ABS MegaCam 311M/312M Series Network Camera User’s Manual E-Mail : Setup E-Mail configuration You may setup SMTP mail parameters for further operation of Event Schedule. That’s, if users want to send the alarm message out, it will need to configure parameters here and also add at least one event schedule to enable event triggering.
  • Page 56 ABS MegaCam 311M/312M Series Network Camera User’s Manual Type the sender’s E-mail address. This address is used for reply e-mails. E-mail To: Type the receiver’s e-mail address. E-mail Subject: Type the subject/title of the e-mail. www.abs.com 56/85...

  • Page 57: Object Detection: Setup Object Detection

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Object detection : Setup Object detection Use this menu to specify motion detection window 1 to window 4 and set the conditions for detection while observing a captured image. Add and Del: To add or delete the motion windows.

  • Page 58: Event Server: Setup Event Server Configuration

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Event Server : Setup event server configuration FTP: Setup FTP configuration You may setup FTP parameters for further operation of Event Schedule. That’s, if users want to send the alarm message to an FTP server, it will need to configure parameters here and also add at least one event schedule to enable event triggering as SMTP.

  • Page 59: Tcp Server: Setup Tcp Server Configuration

    ABS MegaCam 311M/312M Series Network Camera User’s Manual FTP Path: Set working directory path of FTP server. FTP Passive Mode: Select passive or active mode connecting to FTP server. TCP Server: Setup TCP Server configuration In addition to send video file to FTP server, the device also can send event message to specified TCP server.
  • Page 60 ABS MegaCam 311M/312M Series Network Camera User’s Manual Name: User can specify multiple HTTP servers as wish. Therefore, user needs to specify a name for each HTTP server setting. URL: Type the server name or the IP address of the HTTP server.

  • Page 61: Event Schedule: Configure The Event Schedule

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Event Schedule : Configure the event schedule This menu is used to specify the schedule of Events and activate the some actions provided by this device. Name: Name of the Event or Schedule.

  • Page 62: Appendix A: Restore Factory Default Settings

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Appendix A: Restore Factory Default Settings There is a button hidden in the pinhole near to the DC power connector. This button is used to restore the all factory default settings. Sometimes restarting the device will make the system back to a normal state.

  • Page 63: Appendix B: Troubleshooting & Frequently Asked Questions

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Appendix B: Troubleshooting & Frequently Asked Questions Question Answer or Resolution Features The video and audio The device utilizes MPEG4 and JPEG dual compression to codec is adopted in the providing high quality images. Where MPEG4 is a standard device.
  • Page 64 ABS MegaCam 311M/312M Series Network Camera User’s Manual holding down more than 3 seconds on the device. 2. Reconfigure the device. Forgot the IP address of Check IP address of device by using the IPWizard.exe the device. program or by UPnP discovery.
  • Page 65 ABS MegaCam 311M/312M Series Network Camera User’s Manual external network. Refer to your router's manual for details. • Access the device from the Internet with the global IP address of the router and port number of the device. • Some routers reject the global IP address to access the device on the same LAN.
  • Page 66 ABS MegaCam 311M/312M Series Network Camera User’s Manual than the setting. the frame rate. The network congestion causes frame rate slower than the setting. • Check the bandwidth of Internet connection. If the Internet bandwidth is lower than target bit rate, the video streaming will not work correctly.

  • Page 67: Appendix C: Ping Ip Address

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Appendix C: PING IP Address The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply.

  • Page 68: Appendix D: Bandwidth Estimation

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Appendix D: Bandwidth Estimation The frame rate of video transmitted from the device depends on connection bandwidth between client and server, video resolution, codec type, and quality setting of server. Here is a guideline to help you roughly estimate the bandwidth requirements form your device.

  • Page 69: Appendix E: Specifications

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Appendix E: Specifications Model CMOS IR Network Camera MPEG4 and JPEG simultaneously and multi-profile Video Encoder Video Resolution Mega-pixel mode: Up to 15fps @ 1024x768 (MPEG4) Up to 5fps @ 1280x1024 (JPEG)

  • Page 70: Appendix F: Configure Port Forwarding Manually

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Appendix F: Configure Port Forwarding Manually The device can be used with a router. If the device wants to be accessed from the WAN, its IP address needs to be setup as fixed IP address, also the port forwarding or Virtual Server function of router needs to be setup.
  • Page 71 ABS MegaCam 311M/312M Series Network Camera User’s Manual Your WAN IP Address will be listed here. Note: Because a dynamic WAN IP can change from time to time depending on your ISP, you may want to obtain a Static IP address from your ISP. A Static IP address is a fixed IP address that will not change over time and will be more convenient for you to use to access your camera from a remote location.
  • Page 72 ABS MegaCam 311M/312M Series Network Camera User’s Manual If you are using the default camera port settings, enter 80 into the Public and • Private Port section, click Apply. Scheduling should be set to Always so that the camera images can be accessed •...

  • Page 73: Appendix G: Ddns Application

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Appendix G: DDNS Application 1. Preface If you have a Cable modem or xDSL, this is a great way to host your own Networked Device or other TCP/IP Service. Get your own domain like www.yourname.com, www.yourname.com.tw etc.
  • Page 74 ABS MegaCam 311M/312M Series Network Camera User’s Manual (3). After the columns show up at the left side, click “Create Account”. (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c. Password and confirmation d.
  • Page 75 ABS MegaCam 311M/312M Series Network Camera User’s Manual Click these two options (5). Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information“. Click the hyperlink address to confirm the DDNS service that you just applied. Then DDNS you applied activated.
  • Page 76 ABS MegaCam 311M/312M Series Network Camera User’s Manual Click to confirm (6). Enter the web page http://www.dyndns.org/ again. Input your username and password that you just applied to login administration interface of DDNS server. Input your account www.abs.com 76/85...
  • Page 77 ABS MegaCam 311M/312M Series Network Camera User’s Manual (7). If the correct username and password are input, you can see the following picture at the top-right of the login page. (8). Click the “Services”. (9). Click the “ Dynamic DNS ”.
  • Page 78 ABS MegaCam 311M/312M Series Network Camera User’s Manual (11). We could create a domain name without any charge at this step. First, we input the host name. (Pink No.1) Then we pick a domain that is easy to remember. (Pink No.2) Finally, click the “Add Host”...

  • Page 79: Appendix H: Power Line Frequency

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Appendix H: Power Line Frequency COUNTRY VOLTAGE FREQUENCY COMMENTS *Neutral and line wires are reversed from that used in Argentina 220V 50 Hz Australia and elsewhere. *Outlets typically controlled by adjacent switch.

  • Page 80: Appendix I: 3Gpp

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Appendix I: 3GPP To use the 3GPP function, in addition to previous section, you might need more information or configuration to make this function work. Note: 1. The camera must be set as Multi-profile mode, not Mega-pixel mode. Otherwise this device can not serve 3GPP stream.

  • Page 81: Appendix J: Enable Upnp Of Windows Xp

    ABS MegaCam 311M/312M Series Network Camera User’s Manual Appendix J: Enable UPnP of Windows XP Use the following steps to enable UPnP settings only if your operating system of PC is running Windows XP. Go to Start > Settings. Click Control Panel www.abs.com...
  • Page 82 ABS MegaCam 311M/312M Series Network Camera User’s Manual Click Add or Remove Programs Click Add/Remove Windows Components The following screen will appear: www.abs.com 82/85...
  • Page 83 ABS MegaCam 311M/312M Series Network Camera User’s Manual Select Networking Services Click Details Select Universal Plug and Play Click Ok www.abs.com 83/85...
  • Page 84 ABS MegaCam 311M/312M Series Network Camera User’s Manual Click Next Please wait while Setup configures the components. www.abs.com 84/85...
  • Page 85 ABS MegaCam 311M/312M Series Network Camera User’s Manual Click Finish www.abs.com 85/85...

Table of Contents