Jet SC-1630, SC-2436 Assembly And Parts Manual

Assembly and Parts Manual
SC-1630/2436 Service Cart
•
Improper assembly can cause personal injury, and/or property damage.
Assembly (refer to parts list on reverse side)
1. Attach the swivel/fixed casters to the bottom tray using (16) M8x16 hex cap screws, (32) M8 flat
washers, (16) M8 lock washers and (16) M8 hex nuts. Tighten all hardware.
2. Attach the four metal supports to the bottom tray using (16) M6x12 cap screws, (32) M6 flat washers,
(16) M6 lock washers and (16) M6 hex nuts. Leave hardware loose until top tray has been installed.
3. While installing the top tray, attach the handle to the same end that has the swivel casters. Use (16)
M6x12 hex cap screws, (32) M6 flat washers, (16) M6 lock washers and (16) M6 hex nuts.
4. Tighten all hardware.
WMH TOOL GROUP
2420 Vantage Drive
Elgin, Illinois 60123
Ph.: 800-274-6848
www.wmhtoolgroup.com
WARNING

•
Read instructions before assembly.
•
Maximum load is 500 lbs. distributed evenly.
•
Do not overload cart.
•
Do not use the cart as a toy.
Part No. M-140023
Revision G 12/04
Copyright © WMH Tool Group