Hints And Tips; Cleaning And Maintenance - Russell Hobbs RHHD20 Instructions And Warranty

2000w professional hair dryer
Table of Contents

Advertisement

5.
If desired, attach the slim concentrator to the hair dryer for easy styling.
6.
Plug the unit into a suitable mains supply and switch it on.

HINTS AND TIPS

As a general guide use higher heat / speed settings for initial drying, rough
drying as well as for thicker, heavier hair. Use lower settings for finer hair, to
complete your style and for more precise control.
Use the concentrator nozzle to help direct airflow.

CLEANING AND MAINTENANCE

This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified
electrical service department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the speed control is set to "0".
The concentrator nozzle can be removed and washed in warm soapy water.
The body of the appliance and the stand should be cleaned with a damp cloth.
Do not let water enter the appliance or the stand.
Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.
Do not immerse the appliance in water or any other liquid, or hold it under a
running tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a
clean, dry, soft cloth.
Ensure all parts are dried thoroughly with a soft towel before reusing. Rinse
and dry with a clean, dry, soft cloth.
This appliance is fitted with a rear filter mesh. To prevent ingress of hair, dust
or fluff, it MUST be kept clean. Regularly clean the internal filter, twist and
7

Advertisement

Table of Contents
loading

Table of Contents