4 Replacement Procedures
4.8
Removable FDD
Disassembling the Removable FDD
To disassemble the removable FDD, first remove the drive from its module bay, then follow
the steps below.
1. Remove two M2.5×4 screws from each side of the drive and three M2.5×4 screws
securing the rear panel.
2. Lift off the FDD bracket.
3. Release the FDD FPC and remove.
4-24
Fig 4-9: Removing the FDD bracket screws
4.8 Removable FDD
Satellite P20-25 Series Maintenance Manual