Table of Contents
Advertisement
Quick Links
Notes
Page
12
SPS5.2 Manual
USER HANDBOOK
FOR
SPS5.2 TEMPERATURE CONTROLLER
RUN
SET
HALT
STANTON
Temperature Controller
Stanton Pottery Supplies Ltd.,
Canal Lane, Westport Lake,
Tunstall, STOKE-ON-TRENT,
Staffordshire, England.
ST6 4NZ
Tel: +44 (0)1782 835467
Fax: +44 (0)1782 812435
email: sales@stanton-kilns.co.uk
www.stanton-kilns.co.uk
SPS5.2 Manual
SPS 5.2
Issue:
5.2E01
Date:
10 July 98
© Stanton Pottery Supplies Ltd.
Manufactured in Staffordshire, U.K.
Page 1
Advertisement
Table of Contents
Related Manuals for Stanton SPS5.2
Summary of Contents for Stanton SPS5.2
- Page 1 Canal Lane, Westport Lake, Tunstall, STOKE-ON-TRENT, Staffordshire, England. ST6 4NZ Issue: 5.2E01 Tel: +44 (0)1782 835467 Date: 10 July 98 Fax: +44 (0)1782 812435 © Stanton Pottery Supplies Ltd. email: sales@stanton-kilns.co.uk Manufactured in Staffordshire, U.K. www.stanton-kilns.co.uk Page SPS5.2 Manual SPS5.2 Manual Page 1...
-
Page 2: Table Of Contents
The design of this instrument has been assessed 4.0 Error Displays and tested assuming maximum connecting lead lengths of 3.0 metres. Thermocouple Failure Heater Failure Other Errors 5.0 Characteristics Page SPS5.2 Manual SPS5.2 Manual Page 11... -
Page 3: Features
Each programme consists of two controlled ramps and a soak period (which may be zero) with a user adjustable (±100°C) top (soak) temperature. A typical firing sequence is illustrated below:- Soak time soak temperature ambient Delay Ramp 1 Ramp 2 Cooling Time Page SPS5.2 Manual SPS5.2 Manual Page 3... - Page 4 Stoneware 1260 Suitable proprietary RC filter networks fitted with insulated wire leads are:- Porcelain 1280 RS Components Part No. 210-364 RS Components (tab fixing) Part No. 210-370 Farnell Electronic Components Part No. 218-893 Page SPS5.2 Manual SPS5.2 Manual Page 9...
-
Page 5: Keys
Ç & Æ keys. Pressing the SET START DELAY key again selects the K2 & K3 are not used (not connected) on the SPS5.2 displayed start delay and returns to the READY display. To start a 00:00... -
Page 6: Firing Displays
This shows that the load has cooled to less than 40°C & firing is COVER 230V ~ 50HZ 1.0A READY complete. Fuse: 1.0A Anti-surge Wickmann type TR5 T1A 250V WARNING ISOLATE FROM ELECTRICAL SUPPLY BEFORE OPENING THIS INSTRUMENT FOR INSTALLATION, CONFIGURATION OR REPAIR PURPOSES Page SPS5.2 Manual SPS5.2 Manual Page 7...
Need help?
Do you have a question about the SPS5.2 and is the answer not in the manual?
Questions and answers