General Information; Safety; Cleaning; Environmental - BT Broadband Talk Softphone: Starter Kit 1 User Manual

7775 Softphone SK1 UG [6]

General information

12
Safety information
• Listening with the headset at high volume may
damage your hearing.
• If you adjust the volume for the microphone or
headphone and it is too high, this may cause
squealing (feedback sound) and can damage
your hearing.
• Do not use while driving or cycling.
• Do not drop your headset or subject it to external
shock which may cause malfunction.
• Do not disassemble or attempt to open up the casing
of either the adaptor or headset. This could expose
you to high voltages or other risks. Contact the
Helpline on 0870 2400 433 for any queries.
• Whenever unplugging the headset or the adaptor,
apply force to the plug part only. Jerking the cord
instead of the plug may cause damage to
the product.
• Do not use any liquid substance to clean the casing of
the product.
• Your product may interfere with other electrical
equipment, e.g. TV and radio sets, telephones or
clock/alarms if placed too close. It is recommended
that you place your product at least one metre
away from such appliances to minimise any risk
of interference.
1/2/07 12:04 pm Page 12
BT Softphone SK1 – Edition 05 – 19.01.07 – 7775

Cleaning

• Clean the product with a damp (not wet) cloth, or an
anti-static wipe. Never use household polish as this
will damage the product. Never use a dry cloth as this
may cause a static shock.

Environmental

• Do not expose your product to direct sunlight.
• Do not submerge any part of your product in water
and do not use it in damp or humid conditions, such
as bathrooms.
• Do not expose your product to fire, explosive or other
hazardous conditions.
• Do note use your product in areas where there is
excessive dust, or with shock or electromagnetic
radiation.
Safety Standards
This product had been subject to testing requirement
for the CE mark, and has been approved to claim the
CE mark for EMC standards
(ENS5022:09.98+A1:10.00+A2:01.03,
ENS5024:09.98+A 1: 10.0 1 +A2:01.03).
The validity of the CE mark is restricted to only those
countries when it is legally enforced, mainly in the
countries of the European Economic Area.
Warning
Any change or modification not expressly approved in
this user guide could void your authority to operate
this equipment.