Buttons; Leds - Vlsi VS1000+1003 User Manual

Voip speaker phone
Table of Contents

Advertisement

HH
3.4.1

Buttons

Vol. Down Media Player and VoIP Speaker Phone mode: turns volume down.
Vol. Up Media Player and VoIP Speaker Phone mode: turns volume up.
Prev Media Player mode: if song has played less than 5 seconds, go to previous song.
Otherwise go to beginning of the song.
Next Media Player mode: Go to next song.
UAudio Mass Storage mode: Go to VoIP Speaker Phone Mode.
UMass VoIP Speaker Phone Mode: Go to Mass Storage mode.
Record VoIP Speaker Phone mode: Record telephone conversation by combining data
from microphone and PC.
Record Media Player mode: Record from microphone.
Power When power is off, turns power on. If pushed for more than 2 seconds when
power is on, turns power off. If pushed for more than approx. 5 seconds, resets the
device.
Pause VoIP Speaker Phone mode: Pauses recording. Press Pause again to continue.
Pause Media Player mode: Pauses playback or recording. Press Pause again to continue.
Reset Resets the device immediately. This button is only used for debugging: it' not
needed on the end-user product.
3.4.2

LEDs

Recording When blinking shortly on, indicates playback from memory card. When
constantly on, recording from microphone to memory card is active. When blinking
shortly off, recording is in pause mode.
Charge Lit when battery charging through USB is active (over 50 mA charge current).
UMass The device is in Mass Storage mode.
Speaker Lit when the internal speaker is active. Final products don't necessarily have
to be equipped with this LED.
Rev. 2.20
VS1000+1003 VoIP Speaker Phone
2009-12-07
VSMPG
3. FEATURES
Page 9(30)

Advertisement

Table of Contents
loading

Table of Contents