Ipod Operation - Jensen WATERPROOF AM/FM/RBDS/WB/CDP/SIRIUS/IPOD READY MSR7007 Installation And Operation Manual

MSR7007

iPod OPERATION

This unit is equipped with an iPod ready function that will allow you to control your iPod (if
compatible) using the control panel control buttons. The following iPod versions are supported:
• iPod 3G (firmware version 2.2 only)
• iPod Mini
• iPod 4G
• iPod Photo
• iPod Nano
• iPod 5G (Video)
NOTE: iPod and iPod Cable sold separately.
Accessing iPod Mode
The unit will automatically switch to iPod mode
when an iPod is plugged into the iPod cable.
To return to the iPod menu from any other source,
press the MODE button (4) on the control panel or
remote control until "iPod" appears on the display.
Turning the iPod On/Off
The iPod power turns on automatically when an
iPod is connected to 30-pin iPod cable, as long as
the vessel ignition is turned on. You can turn the
iPod off by disconnecting it from the cable or by
turning the ignition off. When the +12 volts
switched power source is turned off, the iPod will pause and then enter sleep mode after 2
minutes. While the iPod is connected, the power cannot be turned on or off from the iPod itself.
NOTE: The iPod will continuously recharge when connected to the unit, as long as the
vessel +12 volts switched power source is turned on.
Controlling Playback
Pausing Playback
During playback, press the 1/>|| button (8) to pause the iPod player. "Pause" will appear on the
LCD. Press 1/>|| again to resume playback.
Repeat Play
During playback, press the 3/RPT button (5) to repeat the current song. "Repeat" will appear
on the LCD. Press again to select "Repeat All". Press 3/RPT again to stop repeat playback.
Random Play
During playback, press the 4/RDM button (7) to play all songs in the current category in
random order. Random play will begin once the current song has finished playing. "Shuffle" will
appear on the LCD. Press 4/RDM again to stop random playback.
8 Din iPod Ready Cable
HEAD UNIT
iPod
iPod iPod iPod iPod
Video photo mini nano
iPod Cable
11
Selecting Tracks
During playback, press the TUNE/TRK |<< / >>| button (18, 19) to play the previous or next
track in the current category. Press the TUNE/TRK |<< button (18) once to play the song from
the start position or press TUNE/TRK |<< twice to play the previous track.
Press and hold the TUNE/TRK |<< / >>| button (18, 19) to fast reverse/forward the song.
1 11 21
2a
3
16
MUTE
2b
MODE
4 8 6
NOTE: If you press and hold the TUNE/TRK |<< / >>| button to change the current song
to the previous/next song, you will exit fast reverse/forward mode.
Playlist Selection
Press the INFO button (17) to access Playlist selection mode.
• Press the 5/DN button (9) to select list down.
• Press the 6/UP button (10) to select list up.
• Press the 1/>|| button (8) to select and start playback.
Alternate Display Mode
Press the DISP/SCROLL button (12) to change the display information between single and
double line text display.
17
12 13 19
INFO
DISP
SCROLL
PTY
5 9 15 10 18 14
7