Summary of Contents for Tibo Evo
- Page 1 Turn in back on User Guide Please read this manual carefully before using EVO and retain for future reference.
-
Page 3: Table Of Contents
Turn in back on content ImPOrtant safEty InstrUctIOn InclUdEd In thE bOx IdEntIfyInG thE Parts main unit top view main unit bottom view remote control cOnnEctIOns connect to fm antenna connect to external audio device connect power InstallInG rEmOtE cOntrOl battEry Preparing the remote control replace the remote control battery basIc OPEratIOn... -
Page 4: Important Safety Instruction
Turn in back on Important safety InstructIon safety precautions the lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. - Page 5 Turn in back on Important safety InstructIon Warning: It is important that you read and observe both the instructions in this manual and the instruction on the unit. Keep this manual for safe future reference. this unit was designed and manufactured with a view to providing maximum safety for the user.
- Page 6 Turn in back on Important safety InstructIon loads service do not place heavy loads on the unit and do not do not attempt to carry out any service work by steap on it. the load may fall and cause serious yourself.by opening or removing the cover, you will injury to persons or damage to the unit.
-
Page 7: Included In The Box
Turn in back on Included In the box 1 x User Guide 1 x EVO 1 x remote control (battery included) Turn in back on User Guide 1 x Power cable 1 x antenna cable... -
Page 8: Identifying The Parts
Turn in back on IdentIfyIng the parts main unit top view sOUrcE Press this button repeatedly to select a source. OPEn Open the dock for iPod/iPhone/iPad. Press this button to turn on or switch to the Eco Power standby mode. dOcK load an iPod/iPhone/iPad. -
Page 9: Remote Control
Turn in back on IdentIfyIng the parts remote control /sOUnd select a preset sound effect: bass 1, bass2 or bass 3. sKIP skip to previous track. tune to a radio station by searching backward. select previous radio station. adjust brightness level in standby mode. / start or pause playback. -
Page 10: Connections
Turn in back on connectIons connect to fm antenna connect the supplied fm wire antenna to the fm antenna socket on the unit. If reception is poor, connect an outdoor antenna. Note: before attaching a 75 ohm coaxial lead for outdoor antenna, disconnect the supplied fm wire antenna. -
Page 11: Installing Remote Control Battery
Turn in back on InstallIng remote control battery Preparing the remote control the provided remote control allows the unit to be operated from a distance. Even if the remote control is operated within the effective range (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control. -
Page 12: Basic Operation
Turn in back on basIc operatIon Power you can control all the functions on the main unit or remote control after connecting to power supply (called standby mode). turning the system On Press the button to turn the system on from standby mode. Note: the set will switch to last selected source. -
Page 13: Pair A Bluetooth Enabled Device
Turn in back on basIc operatIon start to play the connected iPod/iPhone/iPad. • to pause/resume play, press the button. • to skip to a track, press the / buttons. • to search during play: Press and hold / buttons, then release to resume normal play. • to navigate through the menu: hold and press m/clOcK button, then press , to select, and press ... -
Page 14: Adjust Sound Level
Turn in back on basIc operatIon Tip: • If there’s an existing connection, hold and press “ / “ button on remote control for a few seconds and the unit will re-activate the pairing mode, the connection will be interrupted. • If there’s no other bluetooth device paired with the unit in two minutes, the unit will return to previous connection. -
Page 15: Troubleshooting
Turn in back on troubleshootIng to keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. no power • Ensure that the ac cord of the apparatus is connected properly. • Ensure that there is power at the ac outlet. -
Page 16: Specification
Power 2 x 25W Woofer Impedance 6Ω rate Power remote distance 30 º angle tibo ltd. reserves the rights to change the technical data and the design of the product without further notice as a result of further development. -
Page 17: Contacts
Turn in back on contacts TIBO Limited dsV house maidstone road milton Keynes mK10 0aJ tel.: 0845 2711 906 E-mail: info@tibo-electronics.com Proof of purchase (attach your receipt here). -
Page 18: Notes
Turn in back on notes... - Page 19 Turn in back on...
- Page 20 Turn in back on www.tibo-electronics.com...
Need help?
Do you have a question about the Evo and is the answer not in the manual?
Questions and answers