Table of Contents
Advertisement
Mail today to –
Fold, stamp and mail or fax to 561-688-0217 or register on the web at www.aquavacsystems.com
Serial #_______________________________________________________TigerShark
This registration card must be mailed within 10 days of purchase to secure limited warranty.
Name_____________________________________________________________________________________
Address___________________________________________________________________________________
City________________________________________________State___________Zip ____________________
Date Purchased____________________________________________________________________________
Is this replacing another pool vacuum?
Purchased from____________________________________________________________________________
City________________________________________________State___________Zip ____________________
The size of my pool surface is___________x__________ Surface is__________________________________
Have you seen us on the internet? Yes____
Aqua Vac Pool Cleaners, Inc.
1711 Longwood Road
West Palm Beach, FL 33409
Attn: Warranty Records
(Located inside filter area)
Registration of Warranty
FOR USE IN THE U.S.A. ONLY.
Yes____ No____ If yes, what brand?______________________
No____
PLACE
STAMP
HERE
Advertisement
Table of Contents
Troubleshooting
Related Manuals for AquaVac TigerShark
Summary of Contents for AquaVac TigerShark
- Page 1 PLACE STAMP HERE Mail today to – Aqua Vac Pool Cleaners, Inc. 1711 Longwood Road West Palm Beach, FL 33409 Attn: Warranty Records Fold, stamp and mail or fax to 561-688-0217 or register on the web at www.aquavacsystems.com Serial #_______________________________________________________TigerShark...
-
Page 3: Tigershark Tigershark
327-0141 for the nearest location or visit our website at www.aquavacsystems.com or www.haywardnet.com. TERMS If a warranty claim is made within the warranty period, your Tigershark will be repaired at no charge (parts & labor) and will be returned to you or the service center freight prepaid. -
Page 5: Table Of Contents
TigerShark, TigerShark 2 TigerShark Plus, TigerShark 2 Plus TigerShark QC Contents General Information .....6 General Operating Instructions ...6 TigerShark QC, Plus and 2 Plus Operating Instructions ....8 Remote Control Trouble Shooting . 9 Machine Assembly/Parts ...10 Maintenance ......11 Trouble Shooting .......12 Specifications ......13... -
Page 6: General Information
(220-240 volt for 240 volt models). 2. Place the power supply (#1) so that the TigerShark can reach all the walls of the swim- ming pool and the power supply is at a minimum distance of 11.5 feet from the pool edge (page 10 Fig. - Page 7 5. Place the TigerShark in the pool. It will slowly sink to the bottom of the pool as the air inside is released. Submersing by hand is helpful. 6. Connect the power supply to the GFCI protected outlet and switch to the “on” position.
-
Page 8: Operating Instructions
Operating Instructions located on page 6. For selection of the desired cleaning cycle follow steps 2 and 3 below. 2. When the TigerShark model is initially switched on, the Quick Clean cycle will automatically be selected. This is indicated by the light on the cycle selection switch located on the power supply. -
Page 9: Remote Control Trouble Shooting
HAND HELD REMOTE CONTROL TROUBLESHOOTING THE REMOTE CONTROL FUNCTION If the TigerShark Plus does not turn when the remote control is activated: Be sure to aim hand held toward power supply, not the unit. Be sure there are no obstructions between the remote control and the power supply. -
Page 10: Machine Assembly/Parts
55’/100’... -
Page 11: Maintenance
(9) by twisting (rotating) it (Fig. h). Storage When out of the water, store TigerShark on its side in a dry, shady location at temperatures between 40ºF - 115ºF (Fig. i). -
Page 12: Troubleshooting
If TigerShark starts working momentarily but then stops working: following the instructions in the maintenance section on page 7. TigerShark in water and reset the power. You may go to “TigerShark Owners - FAQS” at our website for additional information. -
Page 13: Specifications
SPECIFICATIONS Current Consumption 0.78 amps Weight (w/o cable) 21.5 lbs Cable Length, Type 55 ft (100 ft for TigerShark 2 ) Floating Materials High Impact ABS - Metal Parts of Non-Ferrous Stainless Steel Motor Unit PUMP DRIVE Speed (rpm) 2,700... -
Page 14: Figures
Figures... - Page 15 Figures cont.
- Page 16 Figures cont. MOUNTING INSTRUCTIONS...
- Page 17 For Tiger Shark Plus with 433MHz Remote Control Declaration of Conformity TRADE NAME: SWIMMING POOL CLEANER MODEL NUMBER: TIGER SHARK PLUS COMPLIANCE TEST REPORT NUMBER: B60802D1 COMPLIANCE TEST AUGUST 2, 2006 REPORT DATE RESPONSIBLE AQUAVAC POOL PARTY(IN USA): CLEANER 1711 LONGWOOD ROAD WEST ADDRESS: PALM BEACH FL 33409 TELEPHONE:...
-
Page 18: Safety Precautions
PRODUCT UNLESS THEY ARE CLOSELY SUPERVISED AT ALL TIMES. While the TigerShark has been made to operate as safely as possible, we suggest you exercise reason- able care in the handling of the vacuum and inspect the electrical cord frequently for damage or wear, as with any other electrical appliance. -
Page 19: Preventative Maintenance
2. Contact your local Factory Authorized Service Center with the list of parts you will need. Be sure to advise the Service Center of the TigerShark serial number and the date of purchase. If you need the location of your nearest Service Center, please call Aqua Vac Systems, 1-800-327-0141 or 561-688-0211. -
Page 20: Longwood Road, West Palm Beach, Florida
1711 Longwood Road, West Palm Beach, Florida 33409 USA Toll Free 1-800-327-0141 E Mail: info@aquavacsystems.com www.aquavacsystems.com or www.haywardnet.com To order parts call: 800-949-9892 rev 11/08...
Need help?
Do you have a question about the TigerShark and is the answer not in the manual?
Questions and answers