HYOSUNG ST7 Owner's Manual page 78

HEAD LAMP'S BULB REPLACEMENT
1. Remove the three screws
and upside) and the head lamp assem-
bly.
2. Disconnect the head lamp coupler.
3. Remove the dust cover
spring .
4. After removing the bulb at the socket,
replace the new bulb.
5. To install the head lamp, reverse the
above sequence.
(right, left
1. Remove the lens by removing the
2. Push the bulb, turn it to the counter-
3. After stick in the new lamp, assemble the
Overtightening the screws may cause
the lens to crack.
and socket
77
TURN SIGNAL LAMP'S BULB
REPLACEMENT
screw.
clockwise, and pull it out.
lens.
CAUTION