General Instructions; Safety Rules; Loading And Unloading - Invicta SFI-80 Operator's Manual

Band Saw

General Instructions

Thank you for purchasing this quality machine from INVICTA.
As with all equipment, safety is to be the priority. The operator should understand the safety features as well as
apply good safety habits in transportation, adjustment, maintenance and operation of the machine. Practice and
teach others the safe operating procedures of this machine and help to prevent the possibility of accidents.

Safety Rules

1. For your own safety, read carefully the Instruction Manual before attempting to operate the machine.
2. If you are not thoroughly familiar and comfortable with the adjustment and operation of the machine, ask for
instruction from your supervisor or a fully qualified person. You may also contact Invicta USA.
3. Before the initial operation of the machine, remove all packaging, shipping grease and fully assemble the
machine. Pay special attention to the assembly of safety components.
4. Wear proper apparel while operating the machine. Never wear loose fitting clothing, gloves or ties. Always
remove rings or other jewelry before operating the machine. It is strongly suggested the operator wear
shoes with non-slip soles and also wear a protective hair net to prevent hair entanglement in moving parts.
5. Always wear personal safety equipment. Follow the safety regulations of your country and your company.
6. Have a certified person make all wiring connections to power source and properly ground the machine.
7. Always disconnect the machine from the power source and use lockout procedures before servicing,
changing cutting tools and during cleaning of the machine.
8. Before starting the machine, have the work area clean and free of debris. Cluttered areas are invitations for
accidents to occur.
9. Keep all safety guard(s) of the machine in place and in proper working condition. Never operate machinery
without safety equipment in place. Report any damage to your supervisor.
10. Keep children and visitors a safe distance from the working area.
11. Never leave the machine running while unattended. Turn off the power source during breaks. Before
walking away, allow the machine to come to a complete stop.
12. Do not operate the machine under the influence of drugs or alcohol. Consult your physician when taking
medications.
13.
Do not force the machine beyond its limitations. It will produce a nicer and safer job at the rate it was
designed to operate.

Loading and Unloading

During loading and unloading, the machine should not be lifted by
components which could become damaged and affect it's functioning.
The correct procedure is shown in figure 1.
NOTE: To remove the upper cover "A", use the eye bolt "B" Figure 1. Do
not transport the machine through any point other than the eye bolts.
After this, reassemble and cover all the non painted surfaces with a
good quality paste wax.
Mod. SFI-80
A
B
Fig. 1
1