ACS T Series In-Ear Monitors Instructions For Use page 2

Advanced Communication Solutions
Unit 22-23 Beaumont Close
Beaumont Industrial Estate
serious about sound
Banbury, OX16 1TG
t : +44 (0) 1295 266665
f : +44 (0) 1295 259093
www.hearingprotection.co.uk
info@hearingprotection.co.uk
Using your T15 Monitors
To use T15 monitors with your ER series hearing
protectors you will need to remove the filters by
gently squeezing the mould until the filter pops out.
When not in use, always store your filters in the pouch
provided and keep away from moisture and extremes
of heat. Push the T15 monitors into the filter sockets
on the earpieces until they fit securely. The monitors
are slightly oversized to ensure a complete seal from
ambient surroundings and will withstand the force
required to seat them correctly. Note that the T15
monitors are right and left handed with the colour
coding matching that already on your earmoulds.
Never remove your monitors from your ears or the
moulds by pulling on the cables. When not in use,
your T15 monitors should be stored in the pouch
provided, away from moisture and extremes of heat.
Specifications
T1 Custom-Fit IEM T2 Custom-Fit IEM
Type Triple Driver Type Dual Driver
Freq. Response 20Hz - 16KHz Freq. Response 20Hz - 16KHz
Resistance 6.77 Ohms Resistance 6.83 Ohms
Isolation 26dB Isolation 26dB
T3 Custom-Fit IEM T15 Modular IEM
Type Single Driver Type Single Driver
Freq. Response 20Hz - 16KHz Freq. Response 20Hz - 16KHz
Resistance 10 Ohms Resistance 10 Ohms
Isolation 26dB
Isolation 26dB
T Series In-Ear Monitors
Instructions for use