U s e r G u i d e
Now select the COM port and connection speed. You should select the Slow connection speed
unless you are using an internal LAN.
Press OK to connect to the remote COM port and start the HRD radio display.
P
E R F O R M A N C E
A Remote Status display window shows you the data throughput and average round-trip time.
The average round-trip time is the time required to send a message from HRD to the remote
server and get a response. This will be very similar to the value shown when you use Ping to
interrogate a remote host. Typically values of 50 milliseconds or less is very usable.
When you select the slow connection speed only the frequency and s-meter are refreshed. To
refresh all other buttons and slider click Refresh All .
12