Advertisement
Config CC application - PC
FIG. 4
G4 Computer Control Configuration screens (PC and MAC)
The following information is needed for each Modero or TPI/4 panel:
•
NetLinx Master IP Address/DNS (Fixed IP/URL)____.____.____.____
•
G4 Touch Panel Device ID: _______
•
G4 Touch Panel System: _______
•
Computer Control Button Address Port: _______
•
Computer Control Button Address Code (Channel): _______
6.
Press the OK button when finished adding a panel. This action creates
the configuration file.
7.
Add multiple panels using the (
(
) on the MAC (maximum of four).
8.
Press the OK button when finished adding a panel. This action creates
the configuration file in the main USB stick directory. Once the USB Con-
trol Stick has been configured, it can be used on any computer residing
on the Ethernet Network that can communicate with the NetLinx Control
System.
Running the Computer Control Application
1.
Double-click the amxCC (AMX G4CC on a MAC) executable located in
the root directory of the USB Control Stick to launch a WinVNC computer
control session and display the associated icon in the taskbar.
•
The G4CC icon (
) then appears in the taskbar.
•
The icon turns green (
) when a Modero or TPI/4 panel is connected to
the computer.
2.
To terminate your Computer Control session, right-click on the G4CC icon
and select Close Computer Control from the options list.
Warranty Exception
AMX Corporation warrants this product to be free of defects in material and
workmanship under normal use for 30 days from the date of purchase from
AMX Corporation. This product is not eligible for credit return.
AMX Corporation reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
AMX G4CC Config app - MAC
) button on the PC or the Add icon
036-004-2798 9/05 ©2005
REV: E
93-070-602
Advertisement
