Download Print this page

Broadcast Tools SUM-4 Installation And Operation Manual

Four channel stereo utility mixer

Advertisement

Quick Links

®

Installation and Operation Manual

SUM-4
Four Channel Stereo Utility Mixer
Manual update 12/14/04
Due to the dynamic nature of product design, the information contained in this
document is subject to change without notice. Broadcast Tools, Inc., assumes no
responsibility for errors and/or omissions contained in this document. Revisions
of this information or new editions may be issued to incorporate such changes.
Broadcast Tools® is a registered trademark of Broadcast Tools, Inc.
Copyright„ 1989 - 2005 by Broadcast Tools, Inc. All rights reserved.
No part of this document may be reproduced or distributed without permission.
Visit www.broadcasttools.com for important product update information.

Advertisement

loading

Summary of Contents for Broadcast Tools SUM-4

  • Page 1: Installation And Operation Manual

    Manual update 12/14/04 Due to the dynamic nature of product design, the information contained in this document is subject to change without notice. Broadcast Tools, Inc., assumes no responsibility for errors and/or omissions contained in this document. Revisions of this information or new editions may be issued to incorporate such changes.
  • Page 2: Safety Information

    SUM-4 Installation and Operation Manual INTRODUCTION CAUTION! Thank you for your purchase of the tiny TOOLS™ SUM-4, Four Channel Broadcast Tools® Stereo Utility Mixer, which we will refer to throughout the manual as the SUM- Products, as with any 4. We’re confident this product will give you many years of dependable serv- electronic device, can ice.
  • Page 3: Product Description

    “GND” Ground terminals. The station ground should be connected to the chas- sis ground screw located on the far right side of the SUM-4 as viewed from the rear. It is recommended that all cables connected to the SUM-4 be looped through ferrite cores to suppress RF.
  • Page 4: Operation

    SUM-4 Installation and Operation Manual OPERATION Power: Insert the power plug into the power jack on the SUM-4 and the wall trans- former into the proper AC outlet. Verify that the power LED is lit. Three addition- al SUM-4’s may be powered by connecting 22-gauge wire between the power screw terminals and following proper polarity.
  • Page 5: Specifications

    Power Requirement 16 Vac, 600 ma, wall transformer, Supplied. Screw terminals for external powering up to three additional SUM-4’s from one wall transformer. (220 Vac 50-60 Hz CE wall transformer OPTIONAL) Size 4.20" x 6.00” x 1.55", Painted steel chassis w/ 4 – 6-...
  • Page 6 If Broadcast Tools is notified, in writing, of a failure of any item manufactured by Broadcast Tools to conform to the foregoing Limited Warranty within one (1) year following the date of the Buyer’s acquisition of the item, and if the item is returned to Broadcast Tools in accordance with Broadcast Tools’...
  • Page 7 SUM-4 Installation and Operation Manual APPENDIX A Functional Diagram Stereo Output – – Channel 1 – – Channel 2 Monaural Output – – Channel 3 Channel 4 Expansion Inputs Power APPENDIX e e - - m m a a i i l l : :...

This manual is also suitable for:

Tiny tools sum-4