Advertisement
REVERSING THE DOOR OPENING (swing of the door):
REMINDER: make sure that there is sufficient space
behind the cooling coils at the back of your Fridge-
Freezer.
IMPORTANT: Before carrying out this work...
Lay or lean the Fridge-
Freezer on its back side,
taking care not to damage
or break the condenser or
back coils. Make sure
there are no sharp or hard
objects on the floor upon
which you will lie the
appliance down.
NOTE: YOU MUST DISASSEMBLE THE FRIDGE DOORS IN THE
FOLLOWING SEQUENCE:
(Note: the lettered parts refer
to following diagrams):
Remove the plinth
1)
beneath the bottom door by
gently pulling on it. Keep it
near to hand.
Using a flat-head
2)
screwdriver, unscrew the pin 'P'
(pictured in the diagram at
right) from its surrounding
lower hinge assembly. Lift it
out of its socket ('D') and keep
it safe.
BOTTOM DOOR FIRST THEN TOP DOOR.
3)
15
Advertisement
