Vega SP1180 User Manual

Vega SP1180 User Manual

863mhz digital hybrid wireless outdoor speakers

Advertisement

SP1180
863MHz Digital Hybrid Wireless Outdoor Speakers
User's Manual
INTRODUCTION
This 863 MHz digital hybrid wireless speaker system uses latest wireless technology
that enables you to enjoy music and TV sound anywhere inside or outside your home.
You can simply connect the system to any audio source such as Radio, TV, VCR,
Hi-Fi and CD/MP3/VCD/DVD player. Without complicated wiring and installation with
your Audio/Video equipments and rear channel amplifier, the system enables you to
enjoy thrilling, lifelike sound in minutes.
FEATURES
1.
Weatherproof indoor and outdoor speakers.
2.
Automatic Phases Lock Loop (PLL) scanning system on speaker receivers
3.
Phase Lock Loop (PLL) transmission system on transmitter
4.
863 MHz Digital Hybrid RF technology speakers system.
5.
RF technology lets you roam freely throughout your house, garden.
6.
Operating distance up to 100 meters.
7.
No line of sight limitation.
8.
Virtually interference free audio quality.
9.
Auto ON/OFF control.
10.
Auto tuning function.
11.
Remote control unit.
12.
Wall-mountable.
13.
2-way speakers.
P.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP1180 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vega SP1180

  • Page 1 SP1180 INTRODUCTION 863MHz Digital Hybrid Wireless Outdoor Speakers This 863 MHz digital hybrid wireless speaker system uses latest wireless technology that enables you to enjoy music and TV sound anywhere inside or outside your home. You can simply connect the system to any audio source such as Radio, TV, VCR, Hi-Fi and CD/MP3/VCD/DVD player.
  • Page 2: Remote Control

    COMPONENT IDENTIFICATION INSTALLATION TRANSMITTER TRANSMITTER Antenna Insert the antenna tube into the antenna wire. Signal On Indicator (blue) Power On Indicator (red) SPEAKER RECEIVERS Connect the supplied AC/DC power adaptor to an electrical wall outlet. Plug the AC/DC power adaptor in the DC jack located on the rear of the transmitter.
  • Page 3: Operation

    OPERATION Turn on the audio source (TV or audio component) to which the transmitter is connected with. The blue signal LED on the transmitter will light up. Select the channel 1 or 2 of the transmitter for best performance in your location. Turn on the ON/OFF button on the speakers (the ON/OFF button on the remote control unit cannot be used as a primary device to switch on the speakers).
  • Page 4 speakers, the speakers will use the remote control unit to turn off the be at stand-by mode for 5 minutes and the LED will be changed from blue to yellow. You can switch on the speakers again by using the remote control unit during the stand-by time.
  • Page 5: Technical Specifications

    TROUBLE SHOOTING TECHNICAL SPECIFICATIONS NO SOUND Transmission Mode Ensure the AC/DC adaptor is fully inserted into the AC outlet and the Carrier Frequency 863 MHz Digital Hybrid power connection input on the transmitter. Operation Voltage Transmitter, DC 12.5V 150mA Ensure the speakers are switch ON. Speakers, 6 X ‘C’...

Table of Contents