Summary of Contents for Beyerdynamic CA 4146
- Page 1 BEDIENUNGSANLEITUNG OPERATING INSTRUCTIONS NOTICE D’UTILISATION CA 4146 Netzgerät Power Supply Unit Alimentation...
-
Page 2: Table Of Contents
MCS-D 200 control unit – CA 4146 power supply unit....... . -
Page 3: Safety Information
The CA 4146 power supply unit is used when more than 30 devices are to be used with the MCS-D 200 control unit. The CA 4146 power supply unit can be used as a desktop device or mounted into a 19" rack. -
Page 4: Controls And Indicators
• Within one chain only one active EXTENSION PORT of a power supply unit (MCS-D 200 control unit or power supply units of the CA 41xx series) may be connected. The ring cabling is allowed when it starts and ends at the EXTENSION PORTs of the same CA 4146 power supply... -
Page 5: Connections
4.5 Redundant Operation with CA 4146 • Use two CA 4146 power supply units in one MCS-D 200 system for redundant operation. Should one CA 4146 power supply unit fail, the system will still operate without any interruption. At maximum you can connect 45 microphone units. -
Page 6: Technical Specifications
CA 4146 – Optional Accessories Technical specifications Mains voltage........100 - 240 V AC 47 - 63 Hz Fuse . -
Page 7: Examples
CA 4146 power supply unit (6 A) ........ - Page 8 MCS-D 200 control unit CA 4146 power supply unit Additional power supply units when the microphone units are set up in a loop With redundancy i.e. powering the microphone stations on both sides, any cable of the loop can be removed during operation without interrupting the meeting.
- Page 9 Set up the microphone stations as a chain or in a loop. The microphone stations are connected to the Extension Ports of the power supply units as a chain or in a loop. MCS-D 200 control unit CA 4146 power supply unit more microphone units more microphone units...
- Page 10 Never link chains, which are powered by different power supply units. This could lead to an overload of the cable and cause short circuits and cable fire. MCS-D 200 control unit CA 4146 power supply unit NOT ALLOWED! Possible overload of the cable!
- Page 11 In this setup the microphone units connected to the power supply unit no. 3 only work when all power supply units are turned on. MCS-D 200 control unit 1. CA 4146 power supply unit more microphone units more microphone units 2.CA 4146 power supply unit...
- Page 12 MCS-D 202 interpreter station, headset (or microphone and headphone) CA 4146 power supply unit, 6 A CA 4566 Digital / analogue interface (6 in / 6 out) E.g. external transmitter for wireless transmisson...
-
Page 13: Ec-Declaration Of Conformity
Theresienstrasse 8, 74072 Heilbronn, Germany Type of Equipment: Conference & Discussion System Model Numbers: CA 4146 I, the undersigned, as an employee of beyerdynamic, hereby declare that the equipment specified conforms to the above Directive and Standards. Manufacturer’s Signature: Full Name: Ulrich Roth... - Page 14 Theresienstr. 8 | 74072 Heilbronn – Germany Tel. +49 (0) 7131 / 617 - 0 | Fax +49 (0) 7131 / 617 - 224 info@beyerdynamic.de | www.beyerdynamic.de Weitere Vertriebspartner weltweit finden Sie unter www.beyerdynamic.de For further distributors worldwide, please go to www.beyerdynamic.com...
Need help?
Do you have a question about the CA 4146 and is the answer not in the manual?
Questions and answers