Advertisement
The Lissa is heavy and should be placed on a sturdy support. A lot of heat is
generated and there should be several inches of ventilation room around the
unit. Excessive heat build up will decrease the life of the components inside.
The unit should be placed close to the digital source, but far away from any
noise generating components like large transformers and motors.
One the back of the unit there is an IEC power input, Fuse (3 amp Slow Blow),
Four inputs and the left and right outputs. The outputs are locat-
ed farthest from the power input. The digital inputs are individually isolated and
selectable from the front panel selector.
Designed and manufactured in the USA
by Gill Audio Design, N. Providence RI
Model: Alana
Serial Number:__________
REPLACE FUSE WITH
SAME TYPE 2A, 250VAC
SHOCK HAZARD
one
WARNING
DO NOT OPEN
4 GREAT VIEW AVENUE NORTH. PROVIDENCE, RI 02904
input
two
three
four
output
one
two
Left
RIght
Output
Output
401.226.5299
Advertisement
