Using Headphones (Not Included); Specifications - Jensen CD-472 User Manual

6. To review the programmed tracks, press the STOP BUTTON and then the PROGRAM BUTTON. The
first programmed track number will blink in the LED DISPLAY. Press PROGRAM BUTTON repeatedly
to loop through all the programmed tracks.
7. While reviewing program, you may add new tracks as in steps #1 to #3 when a blinking "0" appears. If
" - - " blinks in the LED DISPLAY, you cannot add more new track.
8. To cancel programmed play, press the STOP BUTTON while reviewing programmed tracks or open the
CD DOOR in stop mode.

USING HEADPHONES (NOT INCLUDED)

Inserting the plug of your headphones into the Stereo Headphone Jack will enable you to listen to the CD or
radio in private. When using headphones, the speakers will be automatically disconnected.
Frequency Range:
Power Sources:

SPECIFICATIONS

AM 530 - 1710 kHz
FM 88 - 108 MHz
120V~ 60Hz 12W or
8 x DC1.5V 'C' (UM-2) Batteries (Not included)
8