Speed Volume Function; External Audio Vol Function; Radio Off Function; Restore Default Function - Fiat Idea Sound System Owner's Manual

SPEED VOLUME function

(volume changing with speed)
This function makes it possible to auto-
matically adapt the volume level to the
speed of the car, increasing it as the speed
increases to maintain the ratio with the
noise level inside the passenger compart-
ment.
To turn the function on/off use button
÷ or ˜ . The display will show the
current status of the function:
❒ OFF: function off
❒ LOW: function on
(low sensitivity)
❒ HIGH: function on
(high sensitivity).

EXTERNAL AUDIO VOL function

With this function it is possible to adjust
(setting from 0 to 40) or exclude (OFF) ex-
ternal audio sources.
To turn this function on/off, use button
÷ or ˜ .
The display will show the current status
of the function:
❒ "EXTERN FUNCTION OFF": function
off.
❒ "EXTERN VOLUME: 23": function on
with volume level 23.

RADIO OFF function

(system power on/off mode)
This function enables to switch off the
sound system according to two different
modes. To turn the function on use but-
ton ÷ or ˜ .
The display will show the selected mode:
❒ "00 MIN ": deactivation dependent on
ignition key. Sound system will switch
off automatically when turning the igni-
tion key to STOP;
❒ "20 MIN ": deactivation independent of
ignition key. After having turned the ig-
nition key to STOP the sound system
will stay on for 20 minutes max.
IMPORTANT When the sound system is
switched off automatically after turning the
ignition key to STOP (for both immediate
or 20-minute delayed power off), it will
switch on automatically turning the igni-
tion key to MAR. If the sound system has
been switched off pressing the button
ON/OFF, when turning the key to MAR it
will stay off.

RESTORE DEFAULT function

This function enables to restore default
settings. Options available are the follow-
ing:
❒ NO: no restore;
❒ YES: restore default settings. During
this operation the display will show the
message "RESTORING". At the end of
this operation, the audio source will not
be changed and the previous situation
is displayed.
19