Specifications; Product Service - Cobra CJIC 550 Operating Instructions Manual

Specifications

12 DC Power:
Internal battery (Capacity/Type)
DC power socket (maximum continuous load)
DC fuse
AC Power:
Output power
• Continuous AC output power
• Five minute AC output power
• AC output surge capacity
Output voltage
Output frequency
Output wave form
No load current draw
Input voltage range
Low battery shutdown
Low battery shutdown resume
High battery voltage shutdown
Over temperature shutdown
Overload shutdown
Operating temperature range
Storage temperature range
Internal battery charging controller system:
AC charging bulk charging current
Peak charging voltage (nominal)
Charging restart voltage (nominal)
Air compressor:
Inflation pressure
Physical Specifications:
Jumpstarter cables (size/length)
Dimensions H*W*D
Weight
18
14Ah/12V sealed lead-acid battery
8A with automatic reset
15A
550W
400W
400W
104V-125V
58Hz-62Hz
Modified sine wave
<0.5A
10.5V-15.5VDC
10.0±0.3VDC
12.0±0.3VDC
15.5V±0.3VDC
Yes
Yes
14°F~104°F (-10°C~40°C)
-4°F~158°F (-20°C~70°C)
500mA
14.2V±0.2V
12.9V±0.2V
260 PSI
8.37mm /(460±19.5)mm
2
14" H x 12.75" W x 6.5" D
(355.6mm x 324mm x 165.1mm)
17 lbs., 0.6 oz. (7.8g)
For any questions about operating this new Cobra product, or if parts are
missing...PLEASE CALL COBRA FIRST...do not return this product to the store.
See customer assistance on page A3.
If your product should require factory service, please call Cobra first before
sending your unit. This will ensure the fastest turn-around time on your repair.
You may be asked to send your jumpstarter/power pack to the Cobra factory.
It will be necessary to furnish the following to have the product serviced and
returned.
1. For warranty repair include some form of proof-of-purchase, such as a
mechanical reproduction or carbon copy of a sales receipt. If you send the
original receipt, it cannot be returned.
2. Send the entire product.
3. Enclose a description of what is happening with the jump starter/power
pack. Include a typed or clearly printed name and address of where the unit
is to be returned.
4. Pack unit securely to prevent damage in transit. If possible, use the original
packing material.
5. Ship prepaid and insured by way of a traceable carrier such as United Parcel
Service (UPS) or Priority Mail to avoid loss in transit to:
Cobra Factory Service
Cobra Electronics Corporation
6500 West Cortland Street
Chicago, Illinois 60707 USA.
6. If the jumpstarter/power pack is in warranty, upon receipt of your unit, it
will either be repaired or exchanged depending on the model. Please allow
approximately three to four weeks before contacting Cobra for status. If the
unit is out of warranty, a letter will automatically be sent informing you of
the repair charge or replacement charge.
If you have any questions, please call 773-889-3087 for assistance.

Product Service

19