Appendix C -- Mcd-8000 Display Specifications; Mcd 8000 Functional Specifications - Kaman SERIES 8000 Reference Manual

Appendix C -- MCD-8000 Display Specifications

MCD 8000 Functional Specifications

Input Range: 0-10VDC or 0-20mA
Note:
Sensitivity: 200 microvolts/count or 0.4microamps per count
Note:
Input Impedance:
Note:
A/D read rate: 2 per second nominal
Power: 115VAC +/-10%, 50-60 Hz; 230 VAC +/-10%, 50-60Hz
switch selectable
Kaman Special input module (PN 853727) allows either a
+/-5VDC or +/-10VDC input to the meter but changes it
to be a single ended input.
on units with the Kaman input module (PN 853727) with a
+/-10VDC input, the display will only have 400 microvolt
per count sensitivity.
Voltage mode >=1 Megohm
Current mode 5 ohms
on units with the Kaman input module (PN 853727) with a
+/-10VDC input, the display will have a 20k ohm input
impedance.
50