Mounting Ringlite To Flash Head; Camera Bracket; Landscape Camera Bracket - Bowens Ringlite converter User Manual

MOUNTING RINGLITE TO FLASH HEAD

The Ringlite Converter is compatible with all Bowens
flash heads that use the 'S'-type reflector mount.
Because various Bowens flash heads have the 'S'-
type reflector mount positioned different the user can
simply change / adjust the position of the 'S'-type
adaptor connected to the Ringlite; making it
compatible with a vast range of Bowens flash heads
/ monolights. The various positions to place the 'S'-
type reflector mount for the various Bowens heads
are listed below:
Reflector Mount Positions for various flash heads:
Position 1.
Esprit I, Esprit II, Esprit DX, Esprit Gemini, Esprit Gemini
Digital, Gemini, Gemini R, Gemini Pro, Mono Traveller, Prolite,
Quadmatic and Redwing.
Position 2.
Esprit 750PRO.
Position 3.
Duo, Equipe, Estime, Quad3km and QuadX.
bowens.co.uk
MOUNTING RINGLITE TO FLASH HEAD
Position 1.
Position 2.
Position 3.
- 3 -

CAMERA BRACKET

The Ringlite Converter is supplied with two camera
brackets to enable the photographer to position and
hold their camera in a fixed position. The Ringlite
Converter includes one 'landscape' bracket and one
'portrait' bracket.
N.B. The Ringlite Converter can also be used without
the camera bracket if so desired.

LANDSCAPE CAMERA BRACKET

The 'landscape' camera bracket is fully adjustable
to enable the user to place their camera in the
optimum position. The landscape bracket can be
positioned up or down (see figure 1.) as well as left
to right.
To attach the landscape bracket to the Ringlite
simply remove the two bracket screws found at the
back of the Ringlite, place the landscape in position
and then reinsert and tighten up the screws. To move
the landscape bracket up or down simply loosen the
screws and move the bracket to required height and
then fasten up the screws to lock into place.