GettinG Started Initial Setup Congratulations on buying a Belkin NetCam HD. This device will enable you to easily check in on your home and your loved ones when you are away. To get started, you will need: What’s in the Box Your wireless router, its network name (SSID), and password .
GETTING STArTED Set Up Your Camera Wirelessly 2 . Switch the NetCam to Setup Mode by flipping up the switch on the back of the camera Through Your Mobile Devices Please make sure the switch is in setup mode and the Wi-Fi light is blinking .
Page 5
GETTING STArTED 3. Download the latest Belkin NetCam app or update to the latest version. 4. Set Up on iPhone, iPad, or iPod touch 4.1 Connect your mobile device to NetCam Wi-Fi signal Note: When download is complete, don’t open the app yet. Please proceed to step 4.
Page 6
GETTING STArTED 4.2 Launch the NetCam App 4.3 Camera Setup Click “Continue” to begin setup. Once your device establishes a connection with the camera, launch the NetCam App. You should see a pop-up message like the one below. Click “Yes” to set up your camera. If you don’t see the pop-up, you are not connected to the NetCam HD+ Wi-Fi signal.
Page 7
GETTING STArTED 4.4 Camera Preview 4.5 Connect to Internet The camera will show you a preview after successfully connecting to Choose your Wi-Fi network to connect to the Internet. your device. Click “Connect Camera to Internet.”...
Page 8
GETTING STArTED Please wait for the camera to establish connection with the Internet. 4.6 Connect to Internet Enter your Wi-Fi password if you have a security-enabled network.
Page 9
GETTING STArTED 4.8 Use Existing Account 4.7 Create an Account If you have an existing account, select “Use Existing” and then enter If this is your first time setting up your camera, you will need to create your account information. Click “Sign in.” an account.
Page 10
GETTING STArTED 4.9 Set Up Camera Info Click “Continue.” It will take a few seconds to register the camera with the server. Create the camera name and its description.
Page 11
GETTING STArTED Congratulations 4.10 Setup Complete Please flip the setup switch down on the back of the NetCam. Click “Finish” to complete the setup.
Page 12
GETTING STArTED 5. Set Up on Android Devices 5.2 Launch NetCam App 5.1 Connect your device to NetCam Wi-Fi signal Once your device establishes a connection with the camera, launch the NetCam App. You should see a pop-up message like the one below. Go to “Settings >...
Page 13
GETTING STArTED 5.3 Camera Setup 5.4 Camera Preview Click “Continue” to begin setup. The camera will show you a preview after successfully connecting to your device. Click “Connect camera to Internet.”...
Page 14
GETTING STArTED 5.5 Connect to the Internet 5.6 Connect to Internet Choose your Wi-Fi network to connect to the Internet. Enter your Wi-Fi password if you have a security-enabled network.
Page 15
GETTING STArTED Please wait for the camera to establish an Internet connection. 5.7 Create an Account If this is your first time setting up your camera, you will need to create an account.
Page 16
GETTING STArTED 5.8 Use Existing Accounts 5.9 Set Up Camera Info If you have an existing account, select “Use Existing” and then enter Create the camera name and its description. your account information. Click “Sign in.”...
Page 17
GETTING STArTED Click “Continue.” It will take a few seconds to register the camera with 5.10 Setup Complete the server. Please flip the setup switch down on the back of the NetCam. Click “Finish” to complete the setup.
Page 19
GETTING STArTED 1/8 in or 5.5mm 2.5mm Attach screws to wall and hang plate onto screws. 6. Mounting Your Camera (optional) Unscrew camera post from the base and remove weight.
Page 20
GETTING STArTED Align base with plate and screw on camera post.
GettinG tO KnOW YOUr Wi-Fi CaMera Back Panel Network Green: Connected to server Orange: Connected to local area network only Flashing Amber: Not connected to any network Flashing Green: Connected to network, ready to set up Power Green: Power On D: Camera Stand You can adjust the NetCam’s position by adjusting the stand.
teChniCal detailS Software Features and Specifications App on iOS or Android • Camera setup • Live camera viewing • Save snapshot and video from the live stream • Live two-way audio • Camera settings • Enable/disable email alert • Camera sharing •...
Page 24
TECHNICAL DETAILS Web App • Live camera viewing • Live audio on selected PC web browsers (Internet Explorer ® Firefox ® , and Google Chrome ™ • Camera settings • Camera firmware upgrade • Delete camera • Invite friends to view your camera •...
TECHNICAL DETAILS Main Window Camera Configuration Camera Name Sharing • Shared: Camera is shareable • Private: Camera isn’t being shared Audio • On/Off Speaker Volume Infrared Lights Camera Configure Status Camera • Auto/On/Off Screen Rotation • Right side up • Upside down Size •...
Page 26
TECHNICAL DETAILS Capture Image Record Enable/ Push-to-Talk Video Disable Audio...
Access this link via Internet Explorer, Netscape, Firefox, To protect your security against a hacker, a pop- or Google Chrome: http://www.belkin.com/netcam up message will alert you if someone else is logged into your account at the same time as you .
TECHNICAL DETAILS NetCam Cloud + How to activate the Cloud + free trial 1. Go to the Camera Settings on which you wish to start the free trial. 2. In the Camera Settings screen, select the option for Purchase Plan. 3.
Page 29
How to delete a clip saved on the cloud 1. Log into your NetCam account by going to http://www.belkin.com/netcam 1. From a web browser only, go to the Clips tab. 2. Once logged in, click on the Clips tab at the top of the video viewer.
Page 30
TECHNICAL DETAILS How to download a clip saved on the cloud How to enable/disable saving clips to the cloud 1. From a web browser only, go to the Clips tab. 1. From the NetCam App, go to the camera settings page of 2.
Page 31
TECHNICAL DETAILS How enable/disable push notifications and email alerts Note: Push notifications and email alerts can only be activated if you have already enabled the option for saving clips. 1. From the NetCam App, go to the camera settings page of the NetCam with the cloud storage you wish to disable.
Page 32
teChniCal detailS Hardware Features and Specifications Camera Audio Camera Image Sensor Audio In 2MP 1/3.2 inch CMOS sensor Built-in microphone, -38 dB ± 2 dB Lens Audio Compression Focal length: 3.0mm, F2.0 G.711, PCM View Angle Audio Out Diagonal: 91° Built-in speaker 4 IR LEDs Ir LEDs &...
Page 33
teChniCal detailS General Processor: RT7620 Speed: 580MHz System SDRAM: 128MB Flash: 16MB Reset Button • Reset system: Press less than 1 second to restart the system Button • Factory default: Press and hold 20 seconds to restore the factory default settings Switch Setup mode switch: Turn setup mode on and off Setup Mode LED...
teChniCal detailS System Requirements Resetting the Camera iPhone, iPad, or iPod touch with iOS 5 or above The “Reset” button is used in rare cases . In the unlikely event that your camera functions improperly, please use a pin to reset the camera .
trOUbleShOOtinG, SUppOrt, and WarrantY if i buy more cameras, could i use the same username to connect them? how can i share my cameras with my friends? Unlimited cameras can be added under your own account, but Log into your account. In the My Cam tab, select the camera you each one should have a different camera name.
Page 36
TrOUBLESHOOTING, SUPPOrT, AND WArrANTY d. Tap Show me what’s new How can I upgrade the firmware? There are two ways to upgrade the firmware on your NetCam HD+. 1. Upgrade the firmware from the NetCam App: a. Log into your NetCam account from the app b.
Page 37
Tap Update NetCam FW 2. Upgrade the firmware from a web browser: a. In a web browser, go to http://www.belkin.com/netcam b. Log into your NetCam account c. Find the camera you wish to upgrade from the list and select it d.
Page 38
TrOUBLESHOOTING, SUPPOrT, AND WArrANTY Can I change my username? f. Click Update Camera Firmware Now! Your username is what identifies your account information, and once set, it Note: Once the camera’s firmware begins to update, please allow 3–5 cannot be changed. If you later do not like your username, the only recourse is minutes for the process to complete.
Page 39
TrOUBLESHOOTING, SUPPOrT, AND WArrANTY Forgot or lost your password? The NetCam App login screen has a link labeled “Forgot Sign In?” that takes you to the account sign-in webpage. Type in your username and email address, and then click the Reset button to begin the process of setting up a new password...
In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin.
Belkin product and how to proceed with your claim. To get service for your Belkin product you must take the following steps: Belkin reserves the right to review the damaged Belkin product. All 1.
Page 42
DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state.
PORTUGAL 707 200 676 www.belkin.com/uk/networking/ You can find technical-support information on our website, RUSSIA 8-800-555-0231 www.belkin.com/networking/ www.belkin.com, by navigating to the tech-support section. SLOVAKIA 08000 04614 www.belkin.com/networking/ SLOVENIA 0800 80510 www.belkin.com/networking/ If you want to contact technical support by phone,...
Class B digital device, pursuant to the requirements of EN 55022 and EN 55024. These limits are designed to provide reasonable We, Belkin International, Inc., of Schiphol-Rijk, Netherlands, protection against harmful interference in a residential installation. declare under our sole responsibility that the device, F7D7602,...
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC, the EMC Directive 2004/108/EC, and the low-voltage Directive 2006/95/EC. A copy of the European Union CE marking “Declaration of Conformity” may be obtained at the website: www.belkin.com/doc For information on product disposal please refer to: http://environmental.belkin.com General Safety Information: •...