Samsung Galaxy Tab 2 10.1 User Manual page 120

Scan for Wi-Fi Networks
To make sure you have an accurate list of Wi-Fi networks.
Settings ➔
Touch
Add Wi-Fi Network
To open a dialog where you can add a Wi-Fi network by
entering its Network SSID (the name it broadcasts), security
type, and other properties:
Settings ➔
1. Touch
Wi-Fi network.
2. Use the keyboard to enter Network SSID.
3. Touch the Security field and then touch a security type.
Note: Depending on the Security protocol used by the WAP,
additional network information may be required, such as
a Password.
4. If necessary, touch Password and enter the password or
hex key.
5. Touch Save.
114
Wi-Fi, and then touch Scan.
Wi-Fi, and then touch Add
Advanced Settings
Set up and manage wireless access points.
Settings ➔
1. Touch
Menu ➔ Advanced.
2. Touch
The following options display:
• Network notification: Have your device alert you to new
Wireless Access Points (WAPs). Touch Network notification to
turn notifications On or Off. When enabled, a check mark
appears in the check box.
• Keep Wi-Fi on during sleep: Specify when to disconnect from
Wi-Fi. Option are: Always, Only when plugged in, or Never.
• Check for Internet service: When connected to an AP
(Access Point), check whether Wi-Fi internet service is
available.
• Auto connect: Automatically connect to a Wi-Fi hotspot when
detected.
• MAC address: View your device's MAC address, required
when connecting to some secured networks (not configurable).
• IP address: View your device's IP address.
Wi-Fi.