Table of Contents
Advertisement
2-3) Check that you have inserted the right card and have installed the proper driver.
If the GL-241101 does not function after attempting the above steps, remove the PCMCIA Card,
and do the following:
From the run window enter, c:\windows\system, locate and delete the cw10.sys file
Open the "Control Panel" double-click "System" and delete PRISM2 IEEE 802.11 PC-
card Adapter.
Restart the PC and repeat the hardware and software installation steps outlined in
Chapters 3 and 4.
The GL-241101 station cannot communicate with other computers linked via Ethernet in the
Infrastructure configuration.
Probable Solution:
Ensure that the GL-241101 with which the station is associated is powered on.
Confirm the station is configured with the same operating radio channel as the GL-241101.
If the IDs are different, change the GL-241101 and all the stations within the BSS to
another radio channel.
Ensure that the station is configured with the same security options as the GL-241101, and
can be turned off and on with the same security key.
Confirm that the BSS ID is the same as the GL-241101 for a roaming disabled station.
Alternately confirm that the ESS ID is the same as the GL-241101 for a roaming enabled
station.
63
Advertisement
Table of Contents
