Panasonic SC-HTB527 Operating Instructions Manual page 22

The main unit is automatically switched to
standby mode.
The auto standby function is on.
The main unit will automatically switch to standby
mode when no signal is input and no operation is
performed for approx. 2 hours. Refer to page 20 to
turn this function off.
The main unit is turned off when the TV's
speakers are selected in the speaker control.
This is a normal feature when using VIERA Link
(HDAVI Control 4 or later). Please read the
operating instructions for the TV for details about its
power save feature. (
The , DTS or PCM indicators blink for 10
sec and then turn off.
≥ Are you changing the Audio output modes
settings? ( 18)
≥ Are you changing the 3D sound settings? (
≥ Are you changing the dual audio settings? (
≥ Are you changing the auto standby function
settings? ( 20)
≥ Are you changing the Remote control code
settings? ( 20)
HDMI
This system does not operate correctly.
If the HDMI cable is connected to the wrong
terminal (HDMI IN or HDMI OUT), this system will
not operate correctly. Turn the main unit off,
disconnect the AC mains lead and reconnect the
HDMI cable(s). ( 14, 15)
VIERA Link related operations no longer
function properly.
≥ Check the VIERA Link setting on the connected
devices.
≥ Have you turned the VIERA Link settings off?
( 21)
≥ When the HDMI connections are changed, after a
power failure or after the AC mains lead has been
removed, VIERA Link operations may not
function properly.
jTurn on all the devices that are connected to
the TV with an HDMI cable and then turn the
TV on.
jTurn off the VIERA Link settings of the TV and
turn it on again. For details refer to the
operating instructions for the TV.
22
RQT9834
19)
jWhile the main unit and the TV are connected
with the HDMI cable, turn on the TV and then
remove the main unit's AC mains lead cord and
reconnect it again.
The first few seconds of audio cannot be heard
when using the HDMI connection.
This may occur during DVD-Video chapter
playback. Change the digital audio output setting
on the connected device from "Bitstream" to "PCM".
When operating an HDMI compatible device of a
different brand, the main unit reacts in an
unwanted manner.
HDAVI Control commands may use a different
signal depending on the brand of the device. In this
case, turn VIERA Link off. (
Sound
No sound (or image).
20)
≥ Turn muting off. (
20)
≥ Check the connections to the other devices.
( 14, 15)
≥ Make sure that the received audio signal is
compatible with this system. (
≥ Turn this system off and then on again.
≥ If the main unit is connected to the TV with only
an HDMI cable, make sure that the TV's HDMI
terminal is labelled "HDMI (ARC)". If not, connect
using the optical digital audio cable. (
≥ If the main unit is connected to a Panasonic TV
and turned on using the button on the main unit
or the remote control, sound might not be output
from this system. In this case, turn the main unit
on using the TV's remote control. (
≥ If the connections are correct, there might be a
problem with the cables. Redo the connections
with different cables.
≥ Check the audio output settings on the connected
device.
≥ When the
there is no audio output from this system, turn
this system off, remove the AC mains lead and
consult you dealer.
≥ If the BD/DVD indicator flashes and there is no
audio output, try the following.
1 Turn the connected device off and then on.
2 Turn off the main unit, remove the HDMI
cable, then reconnect the HDMI cable and
turn the main unit back on.
21)
17)
24)
and DTS indicators blink and
14)
19)