Initial Power-On; Wired Setup - Buffalo LinkTheater P4LWAG User Manual

Getting Started
Powering your LinkTheater on for the first time
When the LinkTheater turns on for the first time, it will attempt to
connect you to a wired or wireless network automatically. Which
screens you see will depend on whether you're connecting your
LinkTheater with a wired or wireless internet connection.

Wired Setup:

If you are using a wired network and have
plugged in an Ethernet cable, then the LinkTheater will
automatically connect to the wired network. You should receive a
message like this.
Highlight Continue and press the right control button on the
remote control.
13