Operation; Starting The Engine; Warming Up The Engine - Sears 917.25930 Owner's Manual

FIGURE 10
ATTACHMENT
CLUTCH LEVER
CLUTCH BRAKE
PEDAL
OPERATION
STARTI NG THE ENGINE
1.
P ace Parking Brake Lever in locked position (Fig. 9).
2.
Prace Anachmen t Clutch Lever in "oFF" position (Fig. 1
OJ.
3.
Place Gear Shift Lever in neutral "N " posit ion (F ig. 11 ).
4. Move Range Shift Lever to " N " neutral position (Fig. 11).
5.
Pusll Clutch-Brake Pedal into brake position (Fig. 12).
6.
Move Throttle Control Lever to middle position (F ig. 13).
7.
Pull Choke out (Fig. 13).
8 .
Turn Ignition Key to "START" position unti l Engine sta rts
(Fig. 13) . Release key into "oN" position.
NOTE: DO NOT RUN STARTE R CONTI NUOUSLY
FOR MORE THAN THIRTY SECONDS AT A TI ME. If
engme does not start after several attempts, move throttle
Control Lever to " FAST" position, wait a few minut es, and
try aga in.
WARMING UP THE ENGINE
Move Throttle Control Lever to slow position . Push Choke
in as engine warms. NOT E: ALLOW ENGINE TO WARM
UP FOR A F EW M INUTES BEFORE OPER A TING.
When restarting a warm engine, move Throt t le Control Lever
in middle posit•on , Choke may not have to be used.
ALWAYS WEAR SUBST AN TIAL FOOT·
WEAR AND AVO ID LOOSE FITTING
CLOTHING TH A T COU LD GET CAUG HT
IN MOVING PARTS.
LEARN TO STAR T, STO P AND REV ERSE
YOUR TRACT OR IN A LA RG E, OPEN
SPA CE.
c